نتایج جستجو برای: jet in cross flow
تعداد نتایج: 17135029 فیلتر نتایج به سال:
In this research dense fluid discharge was experimentally investigated under the surface jet in the shallow acceptor. The investigated parameters were depth of the acceptor ambient, flow rate and the concentration of surface jet. In order to investigate the relationship between these parameters, a physical model experiments were performed in the hydraulic laboratory of Shahid Chamran University...
Research in convective heat transfer using suspensions of nanometer-sized solid particles in base liquids started only over the past decade. Recent investigations on nanofluid, as such suspensions are often called, indicate that the suspended nanoparticles remarkably change the transport properties and heat transfer characteristics of the suspension. Bending walls can also improve heat transfer...
Using of nanofluids and ducts with corrugated walls are both supposed to enhance heat transfer, by increasing the heat transfer fluid conductivity and the heat transfer area respectively. Use of a diverging duct with a jet at inlet section may further increase heat transfer by creating recirculation zones inside the duct. In this work two-dimensional incompressible laminar flow of a nanofluid e...
The effect of a combined system of the bed suction and jet injection as a pier-scour countermeasure on the turbulent flow field is studied in a laboratory flume using an Acoustic Doppler Velocimeter (ADV). The three components of the velocities in the vertical symmetry plane in the equilibrium scour hole in front and rear of the pier under 3-jet injections and bed suction rate Qs/Q0 = 2%located...
In this paper, construction of triplet atmospheric plasma jet using argon, air, oxygen and nitrogen gases is reported. Bactericidal effect of the plasma jet is also investigated. To that end, longitudinal geometric configuration for the electrodes was chosen because it would increase the jet length. Electrical characteristics, jet length dependencies on the applied voltage and gas flow rate wer...
The formation and evolution of 3D synthetic jets is examined using direct numerical simulations. The primary focus of the current study is on examining the formation of 3D synthetic jets and the effect of changes in the jet aspect-ratio on the flow produced by the jet. Jets in quiescent and cross-flow cases are investigated. The study compares the vortex dynamics, velocity profiles and the othe...
In this paper, A numerical study has been conducted to predict the hydrodynamic characteristics of the staggered ribbed backward facing step flow with inclined impinging jet. The impinging jet flow was inclined towards the main cross flow and the angle of inclination is ranged from 30 to 90 . The ribs were in staggered arrangement and aligned after the slot jet in normal direction to the ma...
The Performance of shooting pool, in addition to the quality of the area in which the flow collides with it, depends to the height of the jet drop, the angle of the water flow, the depth of the jet and the concentration of the jet. By increasing the height of the jet drop, the fall velocity increases and subsequently the jetchr('39')s energy will be more intrusive. Different collision area from...
Using of nanofluids and ducts with corrugated walls are both supposed to enhance heat transfer, by increasing the heat transfer fluid conductivity and the heat transfer area respectively. Use of a diverging duct with a jet at inlet section may further increase heat transfer by creating recirculation zones inside the duct. In this work two-dimensional incompressible laminar flow of a nanofluid e...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید