BACKGROUND Because of strong loads acting in the elbow joint, intraarticular fractures with a methaphyseal comminuted fracture site at the distal humerus demand a lot from the osteosynthetic care. Ambiguities arise concerning to the anatomic position of the implants and the resulting mechanic performance. The aim of this biomechanical study was to compare the performance of different anatomical...

BACKGROUND Elastic stable intramedullary nailing (ESIN) is accepted widely for treatment of diaphyseal femur fractures in children. However, complication rates of 10 to 50 % are described due to shortening or axial deviation, especially in older or heavier children. Biomechanical in vitro testing was performed to determine whether two modified osteosyntheses with end caps or a third nail could ...

A series of sled tests was performed using the Q3S anthropomorphic test device (ATD) and the ECE R44 sled buck to study CRS and pediatric occupant kinematics in far-side impacts. Using one model of convertible child restraint system (CRS), tests were performed using a 24 km/hr, 20 g pulse to compare ATD and CRS response to lateral loading in both forward-facing (FF) and rearward-facing (RF) con...

Background: Newer generation intramedullary (IM) tibial nails provide several distal interlocking screw options. The objectives were to determine: 1) if the new oblique interlocking option provides superior stability, 2) which screw orientation/ configuration is the most biomechanically stable, and 3) if three distal interlocking screws provide better stability. Methods: A preliminary experimen...

Complex modular robots can be constructed by means of simple modules. There is no geometric superior size to the total number of modules that can be added. The number of possible configurations growth exponentially. However, an inferior limit exists: the minimum number of modules needed to achieve the locomotion. In this paper, three minimal configurations has been developed using only two and ...

We report a facile roll-printing method, geometrically confined lateral crystal growth, for the fabrication of large-scale, single-crystal CH3NH3PbI3 perovskite thin films. Geometrically confined lateral crystal growth is based on transfer of a perovskite ink solution via a patterned rolling mould to a heated substrate, where the solution crystallizes instantly with the immediate evaporation of...

This paper introduces a novel design concept for the development of efficient, sustainable Rocking-Wall Moment Frames (RWMFs) under seismic conditions. The proposed concepts lead to a novel structural configuration with provisions for Collapse Prevention (CP), Self-Centering (SC), reparability, performance control (PC), damage reduction, and energy based seismic analysis. It introduces the meri...

Abstract: The solution to problem of an orthotropic long cylinder subjected to torsional loading is first obtained by means of separation valuables. The cylinder is twisted by two lateral shear tractions and the ends of the cylinder surface of the cylinder are stress-free. First, the domain under consideration is weakened by an axisymmetric rotational Somigliana ring dislocation. The dislocatio...

PURPOSE The purpose of our study was to determine the long-term functional outcomes of pin tract infection after percutaneous pinning of displaced supracondylar humeral fractures in children, and to evaluate the potential for intracapsular pin placement based on pin configuration in cadaveric elbows. METHODS We conducted a retrospective review of all patients requiring percutaneous pinning in...