نتایج جستجو برای: mechanical permeability

تعداد نتایج: 284362  

2012
Sandeep S. Laxmeshwar

Now a day there is an emerging interest in replacing non-renewable additives with biodegradable compounds. Cellulose plays very important role in this modification. Their low cost and low density associated with high specific mechanical properties represent a good renewable and biodegradable alternative to the most commonly used synthetic reinforcement. The cellulose was modified by using 2-(Tr...

2006

In this paper, conceptual models are presented to identify the effects of solid deformation on the changes in rock permeabilities for (a) fractured media, (b) intact media, and (c) fractured porous media subjected to external loads, all in steady state conditions. Finite element schemes are then developed with embedded correlations between induced strain and modified permeability to simulate th...

2003
W. R. LOEWENSTEIN

The permeability of the membrane surfaces where cells are in contact (junctional membranes) in Chironomus salivary glands depends on Ca ++ and Mg++. When the concentration of these ions at the junctional membranes is raised sufficiently, these normally highly permeable membranes seal off; their permeability falls one to three orders, as they approach the nonjunctional membranes in conductance. ...

Journal: :پژوهش های علوم و صنایع غذایی ایران 0
h. baghaei f. aghaei n. sedaghat m. mohebbi

in view of the importance environmental pollution caused by plastic food packaging, in recent years there is a considerable interest in edible films and coating based on polysaccharides, proteins, lipids or combination of them. edible coatings also serve as carriers of food additives such as anti-browning and antimicrobials agents, colorants, flavor, nutrients and spices, so act as active packa...

2016
Michael George Wei-Zheng Shen Carlo Montemagno

The main aim of this paper is to report the impact of the addition of cellulose nanocrystals (CNC) on the thermal, mechanical, and permeability properties of poly (lactic acid). The thin films were prepared using a modified solvent casting method. The films were fortified with either of two antimicrobial agents: silver (Ag) nanopowder or a peptide. The microstructure, morphology, oxygen and wat...

Journal: :Tissue engineering. Part A 2011
Anna G Mitsak Jessica M Kemppainen Matthew T Harris Scott J Hollister

Successful bone tissue engineering depends on the scaffold's ability to allow nutrient diffusion to and waste removal from the regeneration site, as well as provide an appropriate mechanical environment. Since bone is highly vascularized, scaffolds that provide greater mass transport may support increased bone regeneration. Permeability encompasses the salient features of three-dimensional poro...

Journal: :Molecules 2013
Chao Chen Zideng Gao Xiaoyun Qiu Shuwen Hu

A novel crosslinking agent, suberoyl chloride, was used to crosslink N-phthaloyl acylated chitosan and improves the properties of chitosan membranes. Membranes with different crosslinking degrees were synthesized. The derivatives were characterized by Fourier transform infrared spectroscopy and ¹³C solid state nuclear magnetic resonance spectroscopy, which indicated that the crosslinking degree...

Journal: :مهندسی بیوسیستم ایران 0
عاطفه برومند کارشناسی ارشد، دانشگاه تهران زهرا امام جمعه دانشیار، دانشگاه تهران منوچهر حامدی استاد، دانشگاه تهران سیدهادی رضوی دانشیار، دانشگاه تهران

the effect of oleic and stearic acids on the water vapor permeability (wvp) and mechanical properties of sodium caseinate films was investigated. emulsifiers (span 80 and 85) were employed to produce the base mixture of film. tensile strength (ts), elongation (e) and young's modulus (ym) were obtained for both standard (without lipids) and hydrophobic films. results showed that the additio...

Optically active bionanocomposite membranes composed of polyester(PE) and cellulose /silica bionanocomposite (BNCs) are a novel method to enhance gas separation performance. Commercially available silica nanoparticles were modified with biodegradable nanocellulose through ultrasonic irradiation technique. Transmission electron microscopy (TEM) analyses showed that the cellulose/silica composite...

Journal: Polyolefins Journal 2019

To apply the nanomaterial as a component in the packaging material structure, in this research, the carboxymethyl cellulose (CMC)/polyvinyl alcohol (PVA) film were prepared with three levels of nanoclay particles (0.5, 1 and 3%) using solution casting evaporation method. The incorporation of nanoclay on mechanical, water vapor permeability, and oxygen barrier properties of CMC/PVA-based film wa...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید