photocatalytic membranes exhibit great potential for water treatment since they combine the filtration and photo degradation in a single unit. although blending photocatalytic nanoparticles into polymeric thin film remains the simplest method to prepare the photocatalytic membrane, the entrapped photocatalyst showed less catalytic activity due to the agglomeration and shielding effects in the p...

the role of polymeric additives such as pvp and peg is studied with respect to the morphology of pes porous layer as a sublayer of nanofiltration composite membranes based on pes/pa. results show that by phase inversionprocess of quaternary systems comprised of four components of polymer/solvent/non-solvent/additive and the diffusion of intertwined polymers some changes occur in membrane morpho...

Membrane-based pervaporation (PV) has attracted much attention in the dehydration of organic solvents. Permeate pressure and feed flow rate are two important parameters, which affect membrane performance in pervaporation. The effects of these two parameters on the performance of a commercial poly (vinyl alcohol) membrane in the dehydration of benzene have been investigated in this work. The exp...

the nafion 117 membrane was doped with sio2 particles by sol-gel reaction. the reaction conditions to minimize leaching were investigated by using full factorial design of experiment. the results from the full factorial analysis indicated that the lowest amount of leaching takes place at 60oc without addition of acid and swelling of membranes prior to the reaction. the membranes, prepared at op...

Utilization of membrane humidifiers is one of the methods commonly used to humidify reactant gases in polymer electrolyte membrane fuel cells (PEMFC). In this study, polymeric porous membranes with different compositions were prepared to be used in a membrane humidifier module and were employed in a humidification test. Three different neural network models were developed to investigate several...

Membrane-based technologies have increasingly been chosen in desalination processes, which is evidenced by the increase of large-scale plants constructed in recent years. Indeed, several appropriate strategies should be considered to minimize problems faced during the construction, such as membrane system designs, area requirement, energy requirement, operation and maintenance, and environmenta...

In this work, the effects of permeate pressure and feed flow rate on the performance of a composite polyvinyl alcohol (PVA) membrane in the removal of benzene from gasoline by pervaporation (PV) were evaluated. The results indicate the remarkable effect of permeate pressure on membrane performance as reducing permeate pressure (higher vacuum) from 30 to 3 mmHg causes the total flux to increase ...

In this study, ion exchange nanocomposite membranes was prepared by addition of Mg(OH)2 nanoparticles to a blend containing sulfonated polyphenylene oxide and sulfonated polyvinylchloride via a simple casting method. Magnesium hydroxide nanoparticles were synthesized via a facile sono-chemical reaction and were selected as filler additive in fabrication of ion exchange nanocomposite membranes. ...

Fe2+ ion-selective membrane sensor has been fabricated from polyvinyl chloride (PVC) matrixmembrane containing neutral carrier tetra phenyl porphyrin (TPP) ionophore. The addition ofsodium tetraphenylborate (NaTPB) and the plasticizer DBP has been found to substantiallyimprove the performance of the sensor. The best performance was obtained with the sensor havinga membrane of composition of TPP...