The Ni-Ti-Si composite coatings were successfully fabricated on Ti6Al4V by laser cladding. The microstructure were studied by SEM (scanning electron microscopy) and EDS (energy dispersive spectrometer). It has been found that Ti₂Ni and Ti₅Si₃ phases exist in all coatings, and some samples have TiSi₂ phases. Moreover, due to the existence of these phases, coatings presented relatively higher mic...

Several formulations of alternative alloys have been proposed for the substitution of gold-based alloys used in Dentistry. Recently, a Ni-Cr-Ti-based alloy has been introduced. The purpose of this work was to verify the marginal adaptation obtained with one-piece superstructures for implant-supported prostheses obtained in Ni-Cr-Ti alloy, compared to a semi-noble alloy Pd-Ag. Eight superstructu...

It is well-known, both theoretically and experimentally, that alloying MgH(2) with transition elements can significantly improve the thermodynamic and kinetic properties for H(2) desorption, as well as the H(2) intake by Mg bulk. Here, we present a density functional theory investigation of hydrogen dissociation and surface diffusion over a Ni-doped surface and compare the findings to previousl...

The purpose of this study was to evaluate and compare the force levels of aesthetic Ni-Ti wires to regular Ni-Ti wires of the same dimension and evaluate their mechanical properties. Aesthetic and regular maxillary superelastic Ni-Ti wires (0.016 × 0.022) from four different manufacturers (G&H Wire Company, TP Orthodontics, GAC International, and Ortho Organizers) were selected and grouped I-IV...

INTRODUCTION The purpose of this study was to compare first accessory gutta-percha penetration after the use of nickel-titanium (Ni-Ti) or stainless-steel spreaders in curved resin blocks. MATERIALS AND METHODS Forty resin blocks with 30º and 45º curvatures (20 blocks for each) were prepared and #30 master cones were placed in canals. In part one, under 20 Newton pressure, Ni-Ti or stainless-...

Nickel-titanium (Ni-Ti) instruments are widely used in adult endodontics as an efficient technique, but are rarely used for endodontic treatment for primary molars. To explore the feasibility of using Ni-Ti rotary instruments for root canal preparation in primary molars, 51 primary molars with intact root apex in 22 children, who ranged in age from 3.2 years to 7.7 years, were treated. A modifi...

Polyetheretherketone (PEEK) is now attracting attention as an alternative to metal alloys in the dental field. In the present study, we evaluated the load-deflection characteristics of PEEK wires in addition to their frictional properties. Three types of PEEK wires are used: two sizes of rectangular shape, 0.016 × 0.022 in² and 0.019 × 0.025 in² (19-25PEEK), and rounded shape, diameter 0.016 in...

introduction: the purpose of this study was to compare first accessory gutta-percha penetration after the use of nickel-titanium (ni-ti) or stainless-steel spreaders in curved resin blocks. materials and methods: forty resin blocks with 30º and 45º curvatures (20 blocks for each) were prepared and #30 master cones were placed in canals. in part one, under 20 newton pressure, ni-ti or stainless-...

Ohmic contacts to AlGaN/GaN heterostructures, which have low contact resistance and a good surface morphology, are required for the development of high temperature, high power and high frequency electronic devices. The paper presents the investigation of a Ti/Al based Ti/Al/Ni/Au ohmic contact to AlGaN/GaN heterostructures. Multilayer metallization of Ti/Al/Ni/Au was evaporated by an electron g...