The microstructure of sputter deposited Ti-rich Ni-Ti thin films doped with Cu in the range 020.4 at.% and annealed for 1 h at 500 and 600°C has been investigated and correlated with the mechanical properties of the films measured by depth-sensing nanoindentation. X-ray diffraction analysis showed the microstructural evolution of Ni-Ti thin films when doped with Cu and annealed at different tem...

In the case of medical implants, foreign materials are preferential sites for bacterial adhesion and microbial contamination, which can lead to the development of prosthetic infections. Commercially biomedical TiNi shape memory alloys are the most commonly used materials for permanent implants in contact with bone and dental, and the prevention of infections of TiNi biomedical shape memory allo...

intermetallic phase formation and oxidation reaction during combustion synthesis (cs) of ni-ti equiatomic mixture are affected by mechanical activation (ma) and pre-heating conditions. important parameters are ignition time, reaction duration, temperature rise, microstructural change, titanium oxidation and intermetallic phase formation. superelasticity and shape memory effects are influenced b...

introduction: pulpectomy of primary teeth is commonly carried out with hand files and broaches; a tricky and time consuming procedure. the purpose of this in vitro study was to compare the cleaning efficacy and time taken for instrumentation of deciduous molars using hand k-files and flex master rotary system. materials and methods: in this study, 68 canals of 23 extracted primary molars with a...

This study investigates phase transformation and mechanical properties of porous NiTi alloys using two different powder compacts (i.e., Ni/Ti and Ni/TiH2) by a conventional press-and-sinter means. The compacted powder mixtures were sintered in vacuum at a final temperature of 1373 K. The phase evolution was performed by in situ neutron diffraction upon sintering and cooling. The predominant pha...

The present case report highlights about management of taurodontism which is a developmental anomaly characterized by the lack of constriction at the level of the cementoenamel junction, vertically elongated pulp chambers and apical displacement of the pulpal floor. Permanent molar teeth are commonly affected teeth. Its morphology might hamper the location of orifices and can create difficultie...

Porous NiTi with an average porosity of 55 vol % and a general pore size of 100-600 microm was synthesized by self-propagating high temperature synthesis (SHS) with the addition of mechanically alloyed nanocrystalline Ni-Ti as the reaction agent. The SHS of porous NiTi using elemental powders was also performed for comparison. To enhance the bioactivity of the metal surface, porous NiTi synthes...

The formation mechanism of TiC particles in a Ni-Ti-C system were revealed by using differential thermal analysis (DTA), XRD, and SEM to identify the reaction products in different temperature ranges. The results indicated that the synthesis mechanism of TiC in Ni-Ti-C system was complex; several reactions were involved in the combustion synthesis of TiC-Ni composite. The Ni-Ti intermediate pha...

It is well known that the properties of shape memory alloys, such as binary Ni-Ti (nitinol), are very sensitive to composition.[1-3] Especially on the Ni-rich side of stoichiometry, the martensite/austenite phase transformation temperature decreases abruptly when Ni is increased only a few tenths of a weight percent.[4] In ternary high temperature shape memory alloys (HTSMAs) containing Pt, Pd,...