MnZnFe2O4 ferrite nanoparticles were prepared by co-precipitation method using a microwave heating system at temperature of 100 C. X-ray diffraction reveals the samples as prepared are pure ferrite nanocrystalline phase, transmission electron microscopy image analysis shows particles are in agglomeration state with an average size of about 10 nm, furthermore, crystal size of samples are increas...

Measurements of the strength of magnetoelectric (ME) interactions at microwave and millimeterwave frequencies have been carried out on layered ferrite-piezoelectric oxides. An electric field E applied to the composite produces a mechanical deformation, resulting in a field shift δHE or a frequency shift δfE in the resonance. A stripline structure or a cavity resonator was used. The strength of ...

NiFe₂O₄ and ZnFe₂O₄ nanoparticles have been prepared encased in the MCM (Mobile Composition of Matter) type matrix. Their magnetic behavior has been studied and compared with that corresponding to particles of the same composition and of a similar size (prepared and embedded in amorphous silica or as bare particles). This study has allowed elucidation of the role exerted by the matrix and inter...

In real conditions, austenitic stainless steels solidify in non equilibrium and a two phases microstructure of austenite and ferrite is formed 1 . The aim of this work was to investigate the behaviour of both phases at tensile testing, especially to find out an eventual difference in the relaxation of the deformation energy and the effect of the two phases microstructure in workability. To achi...

MnZn ferrite thin films were deposited on p-Si substrate and used as the dielectric layer in the graphene field effect transistor for infrared and terahertz device applications. The conditions for MnZn ferrite thin film deposition were optimized before device fabrication. The infrared properties and terahertz wave modulation were studied at different gate voltage. The resistive and magnetic MnZ...

A general and simple approach for large-scale synthesis of porous hollow spinel AFe2O4 nanoarchitectures via metal organic framework self-sacrificial template strategy is proposed. By employing this method, we can successfully synthesize uniform NiFe2O4, ZnFe2O4, and CoFe2O4 hollow architectures that are hierarchically assembled by nanoparticles. When these hollow microcubes were tested as anod...

This paper presents the numerical evaluation of the microwave absorption at 2.4 GHz (ISM band) in a homogeneous rectangular head model. Specific absorption rate(SAR) reduction in the head model is achieved by attaching nickel-zinc spinel ferrite sheet resonating at 2.4 GHz to a mobile phone. RF shields made of ferrite sheets are used to suppress surface currents on the mobile phone. Simulations...

Polyaniline-NiFe2O4 nanocomposites (PANI-NiFe2O4) with different contents of NiFe2O4 (2.5, 5 and 50 wt%) were prepared via in situ chemical oxidation polymerization, while the nanoparticles nickel ferrite were synthesized by sol-gel method. The prepared samples were characterized using some techniques such as Fourier transforms infrared (FTIR), X-ray diffraction (XRD), scanning electron microsc...

Applications of magnetostrictive materials, such as sensors and energy-harvesting devices, generally involve the use dynamic deformation, i.e., piezomagnetic effect, induced by an exciting magnetic field H ac . However, this effect is rarely measured directly but commonly approximated strain der...

Anisotropic nano-plate structures in self-assembled perovskite-spinel thin films, BiFeO3-NiFe2O4 and BiFeO3-CoFe2O4, which were deposited on (001)c SrRuO3/SrTiO3 and DyScO3 substrates, respectively, have been demonstrated using transmission electron microscopy combined with strain analysis. Unlike the unitary cube-on-cube orientation relationship reported widely, the growth direction of the CoF...