Abstract—The nonlinear time history analysis of seismically base-isolated structures can require a significant computational effort when the behavior of each seismic isolator is predicted by adopting the widely used differential equation Bouc-Wen model. In this paper, a nonlinear exponential model, able to simulate the response of seismic isolation bearings within a relatively large displacemen...

This study aims to develop seismic fragility curves for a typical pile-supported wharf. Fragility curve is one of the popular tools in seismic performance evaluation of a structure. The software FLAC2D was used to simulate the seismic performance of the wharf structure. Using eight time history records, occurred in past, as seismic loading, incremental dynamic analysis (IDA) was applied for sei...

this study aims to develop seismic fragility curves for a typical pile-supported wharf. fragility curve is one of the popular tools in seismic performance evaluation of a structure. the software flac2d was used to simulate the seismic performance of the wharf structure. using eight time history records, occurred in past, as seismic loading, incremental dynamic analysis (ida) was applied for sei...

Direct Displacement-Based Design (DDBD) is a performence-based seismic design method that has been proposed and well developed over the past two decades to design RC frame structures, shear walls and bridges. In this method, the behavior of a multi-degree-of-freedom (MDOF) sysytem is approximaeted by an equivalent single-degree-of-freedom (SDOF) substitute structure. Although this method has be...

The stiffness and damping of pile foundations are proposed, which vary with the ratio of shear modulus Gi / Go to indicate the nonlinear properties of soil. The range of Gi / Go is defined with different vibration intensities for applications, and a computer program DYNAN is available based on the boundary zone model with non-reflective interface. Two engineering cases are studied to illustrate...

torsion of many symmetric structures, which were designed based on the seismic codes, is due to their asymmetricity induced during inelastic behavior. although the structure was designed symmetrically assuming elastic based criteria, different factors such as material inconsistency in structure, construction details discrepancy and construction errors may result in asymmetric behavior in inelas...

Incremental Dynamic Analysis (IDA) procedure is now considered as a robust tool for estimating the seismic sidesway collapse capacity of structures. However, the procedure is time-consuming and requires numerous nonlinear response-history analyses. This paper proposes a simplified Modal Pushover Analysis (MPA) procedure for IDA of RC moment-resisting frames. The proposed method uses the dynamic...

Within the past decade, seismic isolation systems have gained rapid popularity in the earthquake resistant design of bridge structures. This popularity has come in response to the inadequacy of earlier seismic design and retrofit methodologies. The mechanical shortcomings and subsequent failure mechanisms associated with the early elastic seismic design philosophy are first presented, followed ...

A large part of the building stock in seismic-prone areas worldwide are masonry structures that have been designed without seismic design considerations. Proper seismic assessment of such structures is quite a challenge, particularly so if their response well into the inelastic range, up to local or global failure, has to be predicted, as typically required in fragility analysis. A critical iss...

Nonlinear static procedure (NSP) is a common technique to predict seismic demands on various building structures by subjecting a monotonically increasing horizontal loading (pushover) to the structure. Therefore, the pushover analysis is an important part of each NSP. Accordingly, the current paper aims at investigating the efficiencyof various algorithms of lateral load patterns applied to the...