Progressive collapse is a chain reaction of failures propagating throughout a portion of the structure disproportionate to the original local failure occurring when a sudden loss of a critical load‐bearing element initiates a structural element failure, eventually resulting in partial or full collapse of the structure. Both General Services Administration (GSA) and United States Department of D...

The base isolation systems are among the passive control devices that have been used over the last three decades to limit the seismic-induced response of structures. In this regard, the Uniform Building Code provisions (UBC) has incorporated a special section for the seismic design of base isolated structures since its 1991 edition. Due to the importance of the behavior of these structures unde...

1. Abstract In the real world, structural systems may show nonlinear dynamic behavior. Linear static response structural optimization has been developed quite well by using linear static response analysis. Finite element analysis regarding the nonlinearities or dynamic effects has also been developed very well. However, conventional optimization methods considering the nonlinearities or dynamic...

In this study, a hybrid method is proposed to investigate the nonlinear vibrations of pre- and post-buckled rectangular plates for the first time. This is an answer to an existing need to develope a fast and precise numerical model which can handle the nonlinear vibrations of buckled plates under different boundary conditions and plate shapes. The method uses the differential quadrature element...

Arch dams are generally built in cantilvever monoliths. Vertical contraction joints between monoliths control the stresses due to concrete shrinkage and temperature variations. Past studies in earthquake safety evaluation of the system often show the tensile fracture and local nonlinear deformation of joints. In this paper, some nonlinear joint element constitutive models are presented to exami...

The base isolation systems are among the passive control devices that have been used over the last three decades to limit the seismic-induced response of structures. In this regard, the Uniform Building Code provisions (UBC) has incorporated a special section for the seismic design of base isolated structures since its 1991 edition. Due to the importance of the behavior of these structures unde...

arch dams are generally built in cantilvever monoliths. vertical contraction joints between monoliths control the stresses due to concrete shrinkage and temperature variations. past studies in earthquake safety evaluation of the system often show the tensile fracture and local nonlinear deformation of joints. in this paper, some nonlinear joint element constitutive models are presented to exami...

in this paper coupled nonlinear equations of motion of a suspended cable with time dependent tension and velocity are derived by using hamilton’s principal. a modal analysis for a stationary sagged cable is initially carried out in order to identify the dynamic system. the natural solution is directed to compute the natural frequencies and mode shapes of the free vibration of a suspended cable....

endurance time (et) method is a relatively new performance-based earthquake method for structural evaluation and design. in this method, the structure is subjected to a gradually intensifying accelorogram(s) and its performance is assessed based on the maximum time duration that it can meet the specified performance objectives. using moment-resisting and braced frames which are rehabilitated by...

Masonry infill walls are often used as non-structural elements. According to the past structural failure, ignorance of interaction between infill walls and enclosed frame may lead to the different seismic response for non-ductile building frames. The main contribution of this paper is to analytically investigate the behavior of reinforced concrete with masonry infill panels as participating str...