A multiaxis thrust-vectoring nozzle designed to have equal ow-turning capability in pitch and yaw was conceived and experimentally tested for internal static performance at Langley Research Center. The cruciform-shaped, convergent-divergent nozzle turned the ow for thrust vectoring by deeecting the divergent surfaces of the nozzle, called aps. Methods for eliminating physical interference betwe...

A m ultiaxis thrust-vectoring nozzle designed to have equal ow-turning capability in pitch and yaw was conceived and experimentally tested for internal static performance at Langley Research Center. The cruciform-shaped, convergent-divergent nozzle turned the ow for thrust vectoring by deeecting the divergent surfaces of the nozzle, called aps. Methods for eliminating physical interference betw...

Abstract:-The FSAE guidelines state that it is mandatory for each and every car participating in the said event to have a single circular 20mm restrictor in the intake system. All the air flowing to the engine must pass through this restrictor. Conventionally, a Venturi Nozzle is used as a restrictor. In our research, we have proposed two Nozzles: De-Laval Nozzle and Bell Nozzle as an alternati...

Lateral nozzle forces are known to cause severe structural damage to any new rocket engine in development. Currently there is no fully coupled computational tool to analyze this fluid/structure interaction process. The objective of this study was to develop a fully coupled aeroelastic modeling capability to describe the fluid/structure interaction process during the transient nozzle operations....

Cavitation and turbulence in a diesel injector nozzle has a great effect on the development and primary breakup of spray. However, the mechanism of the cavitation flow inside the nozzle and its influence on spray characteristics have not been clearly known yet because of the internal nozzle flow complexities. In this paper, a comprehensive numerical simulation is carried out to study the intern...

DLR Lampoldshausen carried out cold flow tests to study the flow field in a truncated ideal contour nozzle at low nozzle pressure ratios. A convex shaped Mach disk was found for nozzle pressure ratios less than 10 and a slight concave one for nozzle pressure ratios more than 20. Due to boundary layer transition the convex Mach disk is temporary tilted and redirects the flow towards the nozzle w...

Vortex breakdown of swirling, round jet flows is investigated in the compressible, subsonic regime by means of Direct Numerical Simulation (DNS). This is achieved by solving the compressible Navier–Stokes equations on a cylindrical grid using high-order spatial and temporal discretization schemes. The Reynolds number is Re = ρ c w ◦ c R ◦/μ◦c = 5000 and the flow is moderately compressible with ...