This paper presents the optimization of vibrations of centrifugal pump considering fluid-structure interaction (FSI). A set of centrifugal pumps with various blade shapes were studied using FSI method, in order to investigate the transient vibration performance. The Kriging model, based on the results of the FSI simulations, was established to approximate the relationship between the geometrica...

Computational fluid dynamics (CFD) is a powerful numerical tool that is becoming widely used to simulate many processes in the industry. In this work study of the stirred tank with 7 types of concave blade with CFD was presented. In the modeling of the impeller rotation, sliding mesh (SM) technique was used and RNG-k-ε model was selected for turbulence. Power consumption in various speeds in th...

A ventricular assist device (VAD), which is a miniaturized axial flow pump from the point of view of mechanism, has been designed and studied in this report. It consists of an inducer, an impeller, and a diffuser. The main design objective of this VAD is to produce an axial pump with a streamlined, idealized, and nonobstructing blood flow path. The magnetic bearings are adapted so that the impe...

A secondary nucleation model mainly based on the findings of Ottens (1973) and Evans (1974) considering both crystal-impeller collisions and crystal-crystal collisions was investigated using experimental data obtained from two crystallizers, a 22-liter Draft Tube (DT) crystallizer and an 1100-liter Draft Tube Baffled (DTB) crystallizer, which are both operated continuously in an evaporative mod...

In this paper, three dimensional flow characteristic was presented by a revision of an impeller of an axial turbo fan for improving the airflow rate and the static pressure. TO consider an incompressible steady three-dimensional flow, the RANS equations are used as the governing equations, and the standard k-ε turbulence model is chosen. The pitch angles of 44°, 54°, 59°, and 64° are implemente...

SUMMARY The aerodynamic design and experimental performance of a centrifugal compressor designed for a pressure ratio of 6.5 and a specific speed of 68 are described, The compressor consisted of a radially-vaned impeller and a transonic, vaned radial diffuser. At design speed a peak overall total-to-total isentropic efficiency of 0.746 was achieved at the maximum pressure ratio of 5.9, rising t...

This study presents a blower for air management system of fuel cell modules. A blower is composed of BLDC motor and impeller. Magnetic equivalent circuit model and finite element analysis are used to design the motor, and an improved structure is considered to reduce a mechanical loss induced from bearing units. Finally, air blower system combined with the motor and an impeller is manufactured ...

This paper deals with the design and performance analysis of centrifugal pump. In this paper, centrifugal pump is analyzed by using a single-stage end suction centrifugal pump. Two main components of a centrifugal pump are the impeller and the casing. The impeller is a rotating component and the casing is a stationary component. In centrifugal pump, water enters axially through the impeller eye...

A hybrid method for the simulation of Reynolds-averaged turbulent ̄ows in axial ̄ow impeller driven mixing vessels is described. The time-mean ̄ow in the impeller region is modelled using blade element theory, while the ̄ow in the remainder of the vessel is simulated using a second-order ®nite-volume Reynolds-averaged numerical scheme. The two models are iteratively coupled through boundary con...

A computational fluid dynamics simulation is done for non-Newtonian fluid in a baffled stirred tank. The CMC solution is taken as non-Newtonian shear thinning fluid for simulation. The Reynolds Average Navier Stocks equation with steady state multi reference frame approach is used to simulate flow in the stirred tank. The turbulent flow field is modelled using realizable k-ε turbulence model. T...