Overall liquid side volumetric mass transfer coefficient kLa was determined experimentally for cocurrent Taylor flow moving upwards in a glass tube of an internal diameter of 3mm. Experiments were performed for physical absorption of oxygen in 20% aqueous solution of ethanol. Shadowgraph technique was deployed for precise measurements of bubble lengths and velocities. Experimental values of vol...

The aim of this study is to explore the capability of subcritical methanol to reduce the acidity of naphthenic acids and to determine reaction kinetics for large-scale reactor design.The experiments were carried out in a 25 mL autoclave reactor (China) at temperatures of 70-120oC, Methanol Partial Pressures (MPPs) of 0.1-1.5 MPa, and reaction times of 0-60 min. The total...

Transformation of the tube-side mass transfer coefficient derived in hollow fibre membrane contactors (HFMC) of different characteristic length scales (equivalent diameter and fibre length) has been studied when operated in the low Graetz range (Gz<10). Within the low Gz range, mass transfer is generally described by the Graetz problem (Sh=3.67) which assumes that the concentration profile comp...

This paper reports the results of experimentally removing ammonia from synthetically prepared ammonia solution using a micro scale mixing loop air stripper. Effects of various operational parameters (such as: pH, air flow rate, wastewater flow rate and initial ammonia concentration) were evaluated. By increasing the pH from 10 to 12.25 the amount of KLa increased from 0.26 to 0.73 hr-1. A consi...

A bioreactor refers to any manufactured or engineered device that supports a biologically active environment. These kinds of reactors are designed to treat wastewater treatment. Volumetric mass transfer coefficient and the effect of superficial gas velocity, as the most important operational factor on hydrodynamics, in three-phase airlift reactors are investigated in this study. The experiments...

abstract: in this study, al 2 o 3 /eg and tio 2 /eg nanofluids as coolants have been used in the double-tube heat exchanger. the hot solvent inlet heat exchanger must be cooled down with a specified amount. we can use nanofluids as coolants in the heat exchanger for optimization of the heat transfer area. therefore, the efficacy of nanofluids as coolants is verified. furthermore, flow rate of c...

Mass transfer is a critical scrap melting step. Herein, mass coefficients (k) during were calculated using laboratory-scale experiments. Correlation analysis and the entropy weight method used to determine effect of variables on k. The evaluation model under natural forced convection was established. It consistent with experimental results. Under convection, at 1573 1673 K, when rotation speed ...

A membrane-based gas absorption (MGA) process was evaluated for the removal of volatile organic compounds (VOCs) based on C6H6/N2 mixture. The absorption of C6H6 from a C6H6/N2 mixture was investigated using a hydrophobic polypropylene hollow fiber membrane contactor and the aqueous solution of N-formyl morpholine (NFM) as absorbent. The effects of various factors on the overall mass transfer c...