fe2+ ion-selective membrane sensor has been fabricated from polyvinyl chloride (pvc) matrixmembrane containing neutral carrier tetra phenyl porphyrin (tpp) ionophore. the addition ofsodium tetraphenylborate (natpb) and the plasticizer dbp has been found to substantiallyimprove the performance of the sensor. the best performance was obtained with the sensor havinga membrane of composition of tpp...

a new cesium ion selective pvc membrane based on parent calix [4] arene was developed for potentiometric determination of cesium in environmental samples. the electrode based on p-5,11,17,23tetra(tertbutyl) 25,26,27,28-tetrahydroxy calix[4]arene(thc) as ionophor ,dibutyl phthalate (dbp)as plasticizer ,sodium tetra phenyl borate(natpb)and oleic acid as lipophilic salt and additive showed the ...

a poly(vinyl chloride) membrane based on a new a-dioxime derivative as membrane carrier was prepared andinvestigated as a cr(iii) selective electrode. the electrode exhibits a good potentiometric response for cr(iii)over a wide concentration range 1.0 x 10-6 to 1.0 x 10-1 m with a slope 19.5+0.5 mv/decade and low detectionlimit of 8.9 x 10-7 m. it has a fast response time < 15 s. the best perfo...

a pvc membrane cr(iii) ion selective electrode has been constructed using 2h-1,4-benzothioazine-2,3(4h)dione dioxime (btd) as membrane carrier. the influence of membrane composition on the electroderesponse was studied. the electrode exhibits a nernstian response over a cr(iii) concentration range of 1.0 x10 6 to 1.0>< 10-1 m (r = 0.99) with a slope of 19.5 ± 0.5 mv per decade of concentration,...

a nanocomposite membrane cu2+ ion-selective electrode has been constructed using a new compound ethyl 1,2,3,4-tetrahydro-4-(4-methoxyphenyl)-6-methyl-2-oxopyrimidine-5-carboxylat (etmoc) as a neutral ionophore. the electrode works properly. it responds to cu2+ ion with a sensitivity of 29.5 ± 0.2 mv/decade over the range 1.0 × 10−9 to 5.0 × 10−1m at ph 3.0-8.0. the limit of detection was 4.5 × ...

The preparation of polymer membrane selective to Iron(II) ion and its application to ion-selectiveelectrode is reported here. PVC membrane contains Iron–selective N-phenylaza-15-crown-5 asionophore. The membrane electrode is highly selective to Iron(II) ion and exhibit good linearresponse over a wide concentration range of 1.0 × 10-2 to 1.0 × 10-6 M with Nernstian slope of29.2 ± 0.6 mV per deca...

the electrochemical preparation of poly-n-methylpyrrole (pmpy) coated platinum electrode in chloroform in the presence of tetrabutylammonium perchlorate, hexafluorophosphate, hydrogensulphate, periodate and iodide as supporting electrolytes was performed. the influence of electrosynthesis method, dopant anion type and operation temperature on electrochemical behavior of polymer were demonstrate...

diolefinic antibacterial laser dye namely 1,4-bis[2-(4-pyridyl) vinyl] benzene (4pvb)have been investigated electrochemically using cyclic voltammetry, chronoamperometry, convolution and deconvolution voltammetry combined with digital simulation techniques at a platinum electrode in 0.1 mol / l tetra butyl ammonium perchlorate (tbap) in  solvent 1,2-dichloroethane.  the diolefinic species were ...

Polypyrrole (PPy) nanofibers have been fabricated on glassy carbon electrode (GCE) usingelectrochemical technique. Electropolymerization of pyrrole (Py) for the fabrication of PPy nanofiberswas occurred on GCE by applying a fixed potential of about 0.85 V for 120 sec in a mild basic solutioncontaining sodium carbonate and sodium perchlorate. In the mild basic media, the monomer, Py, isoxidized ...

Diolefinic antibacterial laser dye namely 1,4-Bis[2-(4-Pyridyl) Vinyl] Benzene (4PVB)have been investigated electrochemically using cyclic voltammetry, chronoamperometry, convolution and deconvolution voltammetry combined with digital simulation techniques at a platinum electrode in 0.1 mol / L Tetra Butyl Ammonium Perchlorate (TBAP) in  solvent 1,2-dichloroethane.  The diolefinic ...