PZT ceramics have been widely used in underwater acoustic transducers. However, literature available discussing the design parameters of a miniaturized PZT-based low-duty-cycle transmitter is very limited. This paper discusses some of the design parameters--the backing material, driving voltage, PZT material type, power consumption and the transducer length of a miniaturized acoustic fish tag u...

In this paper, the damage evolution characteristics of C50 concrete under impact load were studied, based on electro-mechanical impedance (EMI) technique. A parallel test was conducted internal relationship between EMI technology and a resonant frequency to verify sensitivity accuracy technology. addition, another mechanical specimens with different levels establish empirical degree properties ...

Icings on moving machinery, such as wind turbines and aircraft wings, degrade their performance safety. Ultrasonic vibration is considered one of the deicing methods. In this research, simulations experiments are carried out to explore effect ultrasonic adhesive characteristic ice aluminum alloy plates. Harmonic response analyses conducted analyze changing distributions shear stresses at interf...

Piezoelectric lead zirconate titanate (PZT) is being gradually applied into practice as a new intelligent material for structural health monitoring. In order to study the damage detection properties of PZT on concrete slabs, simply supported reinforced concrete slabs with piezoelectric patches attached to their surfaces were chosen as the research objects and the Electromechanical Impedance met...

Because of its high electrical conductivity and good diffusion barrier properties ruthenium dioxide (RuO2) is a good electrode material for use with ferroelectric lead zirconate–titanate (PZT) solid solutions. Under certain conditions, RuO2 can react with PZT to form lead ruthenate (Pb2Ru2O6⋅5) during processing at elevated temperatures resulting in lead depletion from PZT. The standard Gibbs e...

Nonlinear properties of lead zirconate-titanate ~PZT! piezoceramics are investigated using ultrasonic second harmonic generation technique. When a sinusoidal ultrasonic wave of frequency v0 is sent into a nonlinear material, the second harmonic wave with frequency 2v0 is generated. Through measuring the absolute amplitude of the fundamental (v0) and of the second harmonic (2v0) waves, the ultra...

Comparative study of the of azo Dyes (as a class important organic pollutants photodegradation process) in aqueous solution employing H2 O2 /UV and K2 S2 O8 /UV systems in a photochemical reactor were investigated. Lead zirconate titanate [Pb (Zr0.58Ti0.42) O3 ] (PZT) nanocatalyst was synthesized via the sol-gel method. Then, photocatalytic properties of dopant type on PZT were determined in a ...

Sol-gel derived lead zirconate titanate (PZT) thin films are being investigated for micromechanical applications. A synthesis technique which involves the spin coating of several thin layers followed by rapid thermal annealing to crystallize the perovskite phase and repetition to achieve thicker films is described. Methods of improving the PZT-PZT interfaces between subsequently annealed layers...

By using Radio Frequency (RF) magnetron sputtering method, Pb(Zr0.5Ti0.5)O3 (PZT) thin films were deposited on Pt/Ti/ SiO2/Si substrates. Pt/Ti bottom electrode was fabricated on SiO2/Si substrates by magnetron dual-facing-target sputtering system. Phase and crystalline structure analyses of the PZT films were performed on an X-ray diffraction(XRD), Surface morphology, roughness and particle si...

Ferroelectric random access memory (FeRAM) has been in mass production for over 15 years. Higher polarization ferroelectric materials are needed for future devices which can operate above about 100 °C. With this goal in mind, co-doping of thin Pb(Zr40,Ti60)O3 (PZT) films with 1 at.% Bi and 1 at.% Fe was examined in order to enhance the ferroelectric properties as well as characterize the doped ...