in the present investigation, a novel adsorbent, ionic liquid modified magnetic nanoparticles (il-fe3o4), was successfully synthesized and characterized by ft-ir spectroscopy, thermogravimetric analysis (tga), xrd analysis, scanning electron microscopy (sem) and theory of brunauer, emmett, and teller (bet) for removal of reactive orange 122 (ro-122) from aqueous solutions. the effects of variou...

Background: Among different pollutants released into the environment, dyes are considered as one of the most dangerous contaminants. In recent years, magnetic nanomaterials have attracted much attention for their dye removal capacity. The aim of this study was to explore the adsorption kinetics of an anionic dye (Reactive Orange 13 (RO)) by NiFe2O4 nanoparticles (NiFe2O4 NPs) under various cond...

conclusions considering the simplicity and efficiency of zero valent iron powder, this method is recommended for removing azo dyes from aqueous environments. results the results of this research showed ph = 3 and contact time = 120 minutes, increasing the zvi dose from 200 to 5000 mg/l in 100 mg/l dye concentration, increased the adsorption efficiency from 36.78% to 97.57%. rr-198 removal follo...

High-surface-area mesoporous MgO-templated nanocarbons made with reinforcing fibres from scrap tyres and a bituminous waste as carbon precursor were employed for the simultaneous adsorption of Cd and reactive Cibacron Brilliant Yellow 3G-P dye. A commercial activated carbon (AC) Darco KB-WJ was also used for comparison purposes. The effect of the pH of the solution was studied to establish whet...

In this work La0.7Sr0.3MnO3 , one group of nanosized perovskite-type oxides were prepared by sol-gel method. The perovskite structure has been characterized by X-ray diffraction (XRD) , scanning electron microscopy (SEM) , energy dispersive X-ray spectrometer (EDX) and Fourier transform infrared (FTIR) . The nanoparticles showed the excellent adsorption properties towards reactive blue 4 (RB4) ...

In this study, the Bohart and Adams’ model taking into account bed depth, and influent dye concentration was studied to exhibit adsorption process of textile dyes (Basic Blue 41 – BB41 and Reactive Black 5 – RB5) in glass columns using tree barks (Eucalyptus camaldulensis). Adsorption capacity coefficient values are determined using the Bohart and Adams’ bed depth service model. The model indic...

Introduction: Dyes have complicated structures, they are usually toxic and resistant to biological treatment and enter the environment through industrial waste streams. The aim of this study was to review the isotherm and kinetic adsorption studies of Reactive Blue 19 (RB19) dye onto Jujube stems powder from synthetic textile wastewater. Materials and Methods: This study was conducted in labo...

Introduction: Discharge of textile wastewater causes the reduction of sunlight penetration, interferes with the receiving waters ecology and damage the environment. The aim of this study was to determine the removal efficiency of reactive blue 19 dye from aqueous solutions by cuttlefish bone powder. Materials & Methods: This study was performed experimentally and in laboratory scale. In thi...

Activated carbon was prepared from Enteromorpha prolifera by zinc chloride activation. The adsorption behaviors of three reactive dyes (Reactive Red 23, Reactive Blue 171 and Reactive Blue 4) onto this biomass activated carbon were investigated in batch systems. The experimental findings showed that the removal efficiencies of three dyes onto activated carbon were maximum at the initial solutio...

Introduction: Colored compounds which often are toxic and carcinogen is one of the environmental pollutants. These pollutants should be removed prior than discharge to the environment. The aim of this study was the evaluation of maize tassel powder efficiency for the removal of Reactive Red 198 dye from synthetic textile wastewater. Materials & Methods: This experimental study was performed in...