This paper proposes a metallic hole array of a rectangular converging-diverging channel (RCDC) shape with extraordinary transmission. We use a three-dimensional (3D) finite element method to analyze the transmission characteristics of two-dimensional metallic hole arrays (2D-MHA) with RCDC. For a straight channel MHA, when the aperture size is reduced, the transmission peaks have a blue-shift. ...

We present an experimental study of the aspect-ratio dependence of two-phase displacement flows in channels of rectangular cross section. Above a buoyancy-dependent threshold Ca[over ;]_{t}, we find that the bulk features of the flow depend only on a modified capillary number Ca[over ;]=[1+0.12(alpha-1)+0.018(alpha-1);{2}]Ca, where Ca is the unmodified capillary number and alpha is the aspect r...

In this paper, the cooling performance of water-cooled heat sinks for heat dissipation from electronic components is investigated numerically. Computational Fluid Dynamics (CFD) simulations are carried out to study the rectangular and circular cross-sectional shaped heat sinks. The sectional geometry of channels affects the flow and heat transfer characteristics of minichannel heat sinks. T...

introduction: side weir structures are extensively used in hydraulic engineering, irrigation and environmental engineering, and it usually consists of a main weir and a lateral channel. side weirs are also used as an emergency structure. this structure is installed on one side or both sides of the main channel to divert the flow from the main channel to the side channel. lateral outflow takes p...

construction of the intake structures to divert some portion of flow water from a main channel causes some variations of flow conditions at the intake entrance. these variations cause the reinforcement of the eddy flow and sedimentation in the bank of the intake. an effective measure to control the entry sediment is the use of submerged vanes. most of previous studies in this regards have been ...

The generalized channel Boussinesq (gcB) two-equation model and the forced channel Kortewegae Vries (cKdV) one-equation model previously derived by the authors are further analysed and discussed in the present study. The gcB model describes the propagation and generation of weakly nonlinear, weakly dispersive and weakly forced long water waves in channels of arbitrary shape that may vary both i...

A micro-channel heat exchanger reactor with different micro-baffle shapes has been studied numerically. Governing equations were solved base on the finite volume method with FLUENT software. In upper section, oxidation reaction of methanol was occurred and in lower section, steam reforming of methanol was done. Two sections were separated with solid part which played as heat exchanger and trans...

This paper focuses on a hydraulic radius separation approach used to calculate the boundary shear stress in terms of bed and wall shear stress proposed in a trapezoidal channel. The average bed and sidewall shear stress in smooth trapezoidal open channels are derived after using Guo & Julien (2005) early equations taking a part of an investigation to cover both rectangular and trapezoidal chann...

In order to obtain an accurate result of the heat transfer of the rib in the internal cooling Rectangular channel, using separation of variables, analytical solutions of three dimensional steady-state heat conduction in rectangular ribs are given by solving three dimensional steady-state function of the rectangular ribs. Therefore, we can get solution of three dimensional temperature field in t...

We confirm Odijk’s scaling laws for (i) the average chain extension; (ii) the variance about the average extension; and (iii) the confinement free energy of a wormlike chain confined in a rectangular nanochannel smaller than its chain persistence length through pruned-enriched Rosenbluth method (PERM) simulations of asymptotically long, discrete wormlike chains. In the course of this analysis, ...