Abstract: This research examines the performance of strengthened non-uniformly corroded reinforced self-consolidating concrete (SCC) members. This paper focuses on three aspects of concrete including corrosion, concrete cover loss, and repair technique. Up to a 50% corrosion level is considered in this study. Corrosion was experimentally induced and was simulated in other cases. Twenty-six rein...

Carbon fiber reinforced polymer (CFRP) sheets are externally bonded to reinforced concrete (RC) members to provide additional strength such as flexural, shear, etc. It has been widely accepted that carbon fiber reinforced polymers (CFRPs) can be used effectively to strengthen reinforced concrete (RC) members. This paper is intended to study and use externally bonded CFRP strips to repair and st...

This paper presents a method of analysis for the response of concrete beams reinforced with fibrereinforced-plastic (FRP) tension rods and aramid spirals. Three different kinds of longitudinal reinforcement are adopted; CFRP, AFRP and GFRP. Both under-reinforced and over-reinforced sections are described. It is found that the ratio of neutral axis depth and effective depth can be used as an ind...

Debonding failure is the main failure mode in flexurally strengthened reinforced concrete beams by externally bonded or near surface mounted fibre reinforced polymer (FRP) composites. It is believed that FRP debonding will be initiated if the shear stress on the concrete-FRP interface reaches the tensile strength of concrete. However, it was found through experimental and analytical studies tha...

Cracks in concrete cannot be prevented but the size of cracks can controlled. that occur are strongly influenced by nature and characteristics constituent materials, especially cement water. fresh hard phases. grouped into two, non-structural structural cracks. There several types such as crazing, map cracking, plastic cracking due to shrinkage, settlement, drying temperature changes, chemical ...

A reinforced concrete member in which the total span or shear span is especially small in relation to its depth is called a deep beam. In this study, a new approach based on the Adaptive Neural Fuzzy Inference System (ANFIS) is used to predict the shear strength of reinforced concrete (RC) deep beams. A constitutive relationship was obtained correlating the ultimate load with seven mechanical a...

Reinforced concrete beam; Shear strength; Artificial neural network; Adaptive neuro-fuzzy inference system; Iranian concrete institute code; American concrete institute code. Abstract In this paper, the Artificial Neural Network (ANN) and the Adaptive Neuro-Fuzzy Inference System (ANFIS) are used to predict the shear strength of Reinforced Concrete (RC) beams, and the models are compared with A...

As the life age of the existing structures are required to meet the changing demands on civil infrastructures. So strengthening and retrofitting are required. Recently many techniques to strengthen the reinforced concrete beams in flexural by using fiber reinforced polymer (FRP) had appeared. The most famous technique among them is strengthening the (RC) beams with externally bonded FRP sheet t...

In this paper, a new roofing system is introduced, which is constructued using the precast composite sandwich panels. This roofing sandwich panels system consists of three kinds of precast concrete sandwich panels including capital panels, beam or between columns panels, and slab or middle panels. The panels are composed of three layers; A high strength reinforced concrete top layer. A thick la...