the rotor of enegelberg whitener was equipped with a screw conveyor to reduce broken rice percentage. according to preliminary experiments this modification could reduce broken rice percentage about 2.5%. further experiment was performed to determine the effect of rotor speeds and blade positions on white rice quality. to do this, five rotor speeds, consisting 500, 600, 700, 800 and 900 r.p.m a...

The inconsistencies accompanied with material properties tipically cause the rise of delamination risk in composites made of different types of glass and crabon fibers. In this study, the delamination of a composite beam reinforced with a carbon layer under bending load is investigated. To this end, a small piece of a wind turbine blade root in the form of a heterogeneous laminated plate is sim...

In this research, a gas turbine blade cascade was investigated. Flow analysis around the blade was conducted using RSM and RNG.K-ε turbulence modeling and it is simulated by Fluent software. The results were considered for the cases as Mach number loss at the trailing edge of blade caused by vortexes that were generated at the end of blade. Effect of cooling flow through the trailing edge on th...

Scaling and root planing contribute to the recovery of periodontal health. All periodontal instruments loose their fine cutting angle after use. To maintain this angle, correct sharpening is required using specifically designed stones. The characteristics of sharpening stones can be compared to the blade of the instruments and also transported to root surface during instrumentation. Root smooth...

A fuzzy logic system (FLS) is developed for ground based health monitoring of a helicopter rotor blade. Structural damage is modeled as a loss of stiffness at the damaged location that can result from delamination. Composite materials, which are widely used for fabricating rotor blades, are susceptible to such delaminations from barely visible impact damage. The rotor blade is modeled as an ela...

An approach is developed to analyze the multiharmonic forced response of large-scale finite element models of bladed disks taking account of the nonlinear forces acting at the contact interfaces of blade roots. Area contact interaction is modeled by area friction contact elements which allow for friction stresses under variable normal load, unilateral contacts, clearances, and interferences. Ex...