An elastomer is a polymer with the property of viscoelasticity, generally having notably low Young's modulus and high yield strain compared with other materials.  Elastomers, in particular rubbers, are used in a wide variety of products ranging from rubber hoses, isolation bearings, and shock absorbers to tires. Rubber has good properties and is thermal and electrical resistant. We used carbon ...

With the increased use of condoms, contact dermatitis to rubber is being seen more often. To develop a rubber condom suitable for use by rubber sensitive people, a "hypoallergenic" condom, which is washed in ammonia to reduce the residues of rubber accelerators, has been manufactured. Fifty patients allergic to various rubber accelerators were patch tested with an ordinary condom and the new wa...

coeffcient of  friction  (cof)  for  rubber parts  is one of  the key parameters in their interaction with solid rough surfaces (micrometer to millimeter scales),  such  as  tire-road  interactions. cof  of  rubber  depends  on  viscoelastic properties of rubber, roughness characteristics of the counter-part surface, and process variables such as contact nominal pressure and sliding speed. due ...

A comparative study on biodegradation of di-cumyl peroxide (DCP) crosslinked and uncrosslinked natural rubber by Pseudomonas sp. was carried out. Decrease in organic carbon content along with the changes in tensile strength of the treated rubber, both DCP crosslinked and uncrosslinked natural rubber, indicated rubber hydrocarbon utilization by the Pseudomonas sp. A decrease in 60.88% MPa and 41...

Crumb rubber powder is a successfully used renewable material obtained from waste tire rubber, which has been incorporated into paving asphalt since the 1930s due to its good resistance deformation and fatigue as well eco-friendly performance. In this study, carbon nanotubes nano silica were terminal blend crumb modified technology remedy issues of excessive desulfurization degradation ground t...

A resorcinol resin/water dispersion and a rubber latex are added to 1% 2,2,6,6,-tetramethylpyperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibers (TEMPO-CNFs) dispersed in water, followed by oven drying at 40 °C for 20 h prepare dried TEMPO-CNF/resorcinol resin/latex (DTRL) mixture with weight ratio of 1/0.5/3. DTRL is then nitrile-butadiene (NBR) or carboxy group-containing NBR (X-NBR) sheet,...

since reusing waste tire as a cheap filler is considerably high, in this study, recycled rubber to replace nr/br is used up to 15 phr and the positive and negative aspects of the rubber powder and reclaimed rubber in the physical, dynamical and processing properties are evaluated. the results showed that in the presence of recycled rubber, the cure rate, crack growth resistance, tear strength a...

Natural rubber (NR) latex collected from the Hevea trees exists as a colloidal suspension (Verhaar, 1959). The amount of latex obtained on each tapping is about 300 mL. The tapping is usually done once every 2–3 days for 9 months each year. Usually, the collected latex is treated with formic acid to coagulate the suspended rubber particles within the latex (Gazeley et al., 1988). After having b...

The aim of this study was to compare the isolation systems OptraDam® Plus and OptiDam™ with the conventional rubber dam in terms of objective and subjective parameters. The isolation systems were applied during the dental treatment of the patients. The time of preparation, placement, presence and removal were measured and the quality of isolation was evaluated. The median time of rubber dam pla...