According to modern seismic codes, in concentrically braced frames the seismic input energy should be dissipated by means of the hysteretic behaviour of braces while all the other members (i.e. beams and columns) have to remain elastic. Accordingly, the design internal forces of braces are determined in these codes by elastic analysis of the structure subjected to seismic forces obtained by the...

Seismic design may require non-conventional concept, due to the fact that the stiffness and layout of the structure have a great effect on the overall structural behaviour, on the seismic load intensity as well as on the internal force distribution. To find an economical and optimal structural configuration the key issue is the optimal design of the lateral load resisting system. This paper foc...

The updated version for the Manual of Civil Structures (MOC), a model seismic code in Mexico, was published in 2008. MOC also is incorporating guidelines for the seismic design of base-isolated structures this year 2012, being the first Mexican code to include such recommendations. This paper summarizes the most relevant aspects of these guidelines, their relations to other guidelines worldwide...

in recent years, seismic evaluation and vulnerability of the existing buildings, that have been designed based on an earlier seismic design code or designed without seismic design criteria, has been very important. in this paper, the seismic evaluation and vulnerability of concrete buildings, using an old 5- story building with shear walls as an example has been discussed. for this building, fi...

D analyses of structures responding elastically to ground motions recorded during severe earthquakes have shown that the theoretical response inertia loads are generally significantly greater than the static design lateral loads recommended by codes. Hence, structures designed for the lateral earthquake loads recommended by codes can only survive severe earthquakes if they have sufficient ducti...

One of the main tasks of engineers is to design structural systems light and economic as possible, yet resistant enough to withstand all possible loads arising during their service life and to absorb the induced seismic energy in a controlled and predictable fashion. The traditional trial-and-error design approach is not capable to determine an economical design satisfying also the code require...

failure of the quay walls due to earthquakes results in severe economic loss. because of hazards threatening such inexpensive nodes of national and international transportation networks, seismic design of quay walls is still an evolving topic in marine structural engineering. this study investigates the sensitivity of the gravity-type quay wall stability respect to uncertain soil and seismic pr...

The significance of the seismic rotational components have been overlooked in the seismic evaluation of structural behavior. As researchers have measured seismic components more accurately using sensitive rotational velocity sensor, it was observed that the magnitude of rotational components is considerable and could not be neglected. Hence, some parts of seismic damage or failure of structures...

in practice, foundations are settled on the soft layers of soil, so the ground must be designed as well as the structure. wave propagation and hysteresis damping of soil layers may alter the seismic response of flexible-base design in comparison to controversial fixed-base. lots of uncertainties about this issue, necessitate most of seismic design standards including iranian standard no. 2800 t...