During underground nuclear tests, rocks may fail by plastic yielding, which limits shear strength, or by tensile fracture, wherever maximum principal stress exceeds tensile strength. A third mode of failure exists due to friction along closed fractured surfaces. There, friction affects slipping and can thus limit stress. In this paper, we study the effect of friction on the simulated dynamic re...

Static friction in shearing mode can be expressed as the product of the shear strength of the interface and the real contact area. The influence of roughness on friction in elastic adhesive contact is analyzed. Special attention is paid to low loading conditions, in which the number of contact points is small. The models are used to analyze a friction experiment in a MEMS friction meter.

Objective: The objective of this study is to examine ground kinetics early in stance while walking on a contaminated surface and assess the potential of kinetics to quantify risk of slipping. Background: Prior studies of slipping have dismissed early ground kinetic data, and therefore no prior literature has been able to assess the viability of using these data to quantify slip potential. Metho...

Understanding the frictional properties of nanostructured surfaces is important because of their increasing application in modern miniaturized devices. In this work, lateral force microscopy was used to study the frictional properties between an AFM nanotip and surfaces bearing well-defined nanodomes comprising densely packed prolate spheroids, of diameters ranging from tens to hundreds of nano...

This paper reports the first direct measurements of static friction force and interfacial shear strength between silicon (Si) nanowires (NWs) and poly(dimethylsiloxane) (PDMS). A micromanipulator is used to manipulate and deform the NWs under a high-magnification optical microscope in real time. The static friction force is measured based on "the most-bent state" of the NWs. The static friction...

We develop a scaling model relating the friction forces between two polyelectrolyte brushes sliding over each other to the separation between grafted surfaces, number of monomers and charges per chain, grafting density of chains, and solvent quality. We demonstrate that the lateral force between brushes increases upon compression, but to a lesser extent than the normal force. The shear stress a...

We present molecular dynamics friction calculations for confined hydrocarbon "polymer" solids with molecular lengths from 20 to 1400 carbon atoms. Two cases are considered: (a) polymer sliding against a hard substrate and (b) polymer sliding on polymer. We discuss the velocity dependence of the frictional shear stress for both cases. In our simulations, the polymer films are very thin (approxim...

Computational experiments based on the direct numerical simulation of turbulent channel flow reveal that the skin friction can be reduced as much as 70% by the action of a localized steady force acting against the flow close to the wall. In addition, the excessive shear stresses observed during the laminar-to-turbulence transition can be substantially reduced. For a sustained reduction in the s...

Sea ice contains flaws including frictional contacts. We aim to describe quantitatively the mechanics of those contacts, providing local physics for geophysical models. With a focus on the internal friction of ice, we review standard micro-mechanical models of friction. The solid’s deformation under normal load may be ductile or elastic. The shear failure of the contact may be by ductile flow, ...