When a brass compensator is set in a treatment beam, beam hardening may take place. This variation of the energy spectrum may affect the accuracy of dose calculation by a treatment planning system and the results of dose measurement of brass compensator intensity modulated radiation therapy (IMRT). In addition, when X-rays pass the compensator, scattered photons are generated within the compens...

Current experimental investigation deals with the effects of asymmetrical rolling parameters on the inhomogeneity, microstructure, mechanical, and geometrical properties of rolled brass wire. Toward this end, a roll machine with three different roll radii ratios was set up. The asymmetrical conditions are arranged using three different sets of rolls with different diameters that result into dif...

Graphite-bearing polycrystalline olivine and polycrystalline clinopyroxene with submicron to micron grain size were successfully sintered from a single crystal of naturally occurring olivine (Fo88–92Fa12–8: Mg1.76–1.84Fe0.16–0.24SiO4) and a single crystal of naturally occurring clinopyroxene (Di99Hed1: Ca0.92Na0.07Mn0.01Mg0.93Fe0.01Al0.06Si2O6). The milled powders of both these crystals were si...

Brass metal work is one of the oldest cottage industries in West Bengal, India. Workers performing rigorous hand intensive jobs are likely to suffer from MSD affecting the upper limbs. The present investigation was intended to establish the prevalence of upper limb MSD among the brass metal workers and to identify the causative factors behind its development. In this study, 50 male brass metal ...

This study investigated whether trachea pressures during brass instrument play of laryngectomised patients are within the range of those measured during tracheoesophageal voicing, and whether application of an automatic speaking valve can 'free' both hands to play a brass instrument. Objective assessment of voicing and music playing parameters was carried out in 2 laryngectomised patients with ...

OBJECTIVES This study evaluated the failure and fracture resistance of zirconia-based fixed partial dentures (FPDs) under the influence of different surface treatments and adjustment procedures. METHODS Seven groups (n=8/group) of three-unit zirconia-based FPDs were fabricated in anatomic design (AD) or anatomically reduced design (ARD) and surfaces were prepared according to clinical relevan...

The objective of this review is to report on the progress of the Brigham and Women's Hospital Rheumatoid Arthritis Sequential Study (BRASS) Registry data collection and summarize previous research in understanding therapeutic response to DMARDs using clinical and genetic data. The BRASS Registry, established in 2003, is a large, single-centre, prospective and observational cohort of 1100 RA pat...

Alumina nanopowders produced by electrical explosion of wires were sintered using the spark plasma sintering technique. The results of XRD analysis show that the main phase in the compacted nanopowders is α-Al2O3. According to the SEM observations, the sintered alumina nanopowder consists of micron-sized faceted grains and nano-sized necked grains. The increase in sintering temperature resulted...

wear is a complicated phenomenon caused by the relative movement of two contacting surfaces compressed together by a normal force. prediction of the wear, in most cases, requires various experiments and microstructural characterization of the contacting surfaces. mathematical models based on physical concepts could provide considerable help in understanding the physical behavior and hence the p...

With the rapid advances in tumor genetics, an increasing number of amplifications have been identified in various human neoplasms (4). Examples of oncogenes amplified in tumors include N-myc and HER-2/neu, which have been proposed as prognostic markers in neuroblastoma and breast cancer, respectively (5,7). To date, most of the information on the amplification of genes has been gathered from co...