This Investigation studies the Mechanical and Tribological behaviour [ i.e dry sliding behaviour] of Al matrix composites reinforced with SiC and Gr particulate up to 10%, to study the effect of reinforcement, Load, Sliding speed and Sliding distance on stir cast Al-SiC and Al-Gr Metal matrix composites. Parametric studies indicate that the hardness, tensile strength of Al-SiC composite is grea...

The dry sliding friction and wear behaviors of TC11 titanium alloy subjected to the ultrasonic impacting and rolling process (UIRP) were studied in the present work. The microstructure of the deformation layer and the morphology of the worn surfaces were observed. The results clearly show that the wear performance of TC11 alloy after UIRP is better than that of TC11 alloy before UIRP under the ...

Ball-on-disk sliding wear tests were conducted on martensitic NiTi shape memory alloy against an alumina counter ball. The wear features and coefficients of friction of the samples subjected to different loads and sliding cycles were investigated to reveal the degradation process of the NiTi surface. Three stages of degradation were identified, namely, a near-zero wear stage, a transition wear ...

The wear mechanism of plasma electrolytic nitrocarburised (PEN/C) 316L stainless steel samples was studied after a pin on disc wear test. The surface morphology of samples after application of PEN/C process was studied using scanning electron microscope technique. The sliding tracks resulting from the wear tests on the treated specimens indicated no signs of plastic deformation and adhesive wea...

Wear of restorative materials has been characterized in vitro using single-pass sliding.'4 Wear patterns and surface structures of composite restorations in vivo have been reported by Kusy and Leinfelder5 and by O'Brien and Yee.6 However, there have been few reports on the correlation between in vitro and in vivo wear. One reason could be that the in vivo wear characteristics result from gradua...

Metal Matrix composites (MMCs) are light weight, high-strength materials with potential application in areas such as automobile, aerospace, defence and other industries. MMCs are projected to significantly reduce the overall weight of the vehicle and aircraft while maintaining satisfactory structural strength. Micron and Nano-sized ceramic particle reinforced aluminum matrix composites fabricat...

In tribological applications, because of the corrosive problems of the metals in water applications, poly-ether-ether-ketone (PEEK) and its composites are preferred for rubbing materials. As it is known PEEK is a high performance semi-crystalline thermoplastic polymer and has received significant attention in recent years. This is due to its high mechanical strength and elastic modulus, high to...

An in vitro study was conducted to evaluate the abrasive wear resistance of high-strength denture teeth (HS teeth). Eight types of specimen were used in the experiments; 3 types of HS teeth, 3 types of conventional plastic denture teeth (PL teeth), porcelain teeth and metal teeth. Sliding-induced wear tests were conducted by sliding the samples on a metal plate. The abrasive wear resistance of ...

The wear of polymer-based materials is connected to their brittleness. We have previously formulated a quantitative definition of brittleness in terms of elongation at break and storage modulus for thermoplastic polymers. We provide a formula connecting brittleness to viscoelastic recovery (healing) after sliding wear. Our model fits a selection of ten thermoplastics representing several classe...

The relative sliding motion of two elastic bodies in contact induces wear process and contact shape evolution. The transient process tends to a steady state occuring at fixed contact stress and strain distribution. This state corresponds to the minimum of the wear dissipation power. The optimality conditions of the functional provide the contact stress distribution and the wear rate compatible ...