in this study, based on a biomimetic approach, novel 3d biodegradable porous hybrid scaffolds consisting of chitosan, gelatin, and tricalcium phosphate were developed for bone and cartilage tissue engineering. macroporous chitosan/ gelatin/β-tcp scaffolds were prepared through the process of freeze-gelation/solid-liquid phase separation. the results showed that the prepared scaffolds are highly...

A fluidized-pellet-bed separator with movable sludge hoppers was applied in pilot scale for the separation and thickening of activated sludge mixture liquid. Under the condition of suspension SS around 4,000 mg/L, polymer (CJX103, cationic, MW 5 × 106) dose at a dry solid ratio of 0.003 and upward flow rate at 5.4 m/hr, the fluidized pellet bed performed solid/liquid separation and sludge thick...

Using a reactive force field ~ReaxFF!, we investigated the structural, energetic, and adhesion properties, of both solid and liquid Al/a-Al2O3 interfaces. The ReaxFF was developed solely with ab initio calculations on various phases of Al and Al2O3 and Al-O-H clusters. Our computed lattice constants, elastic constants, surface energies, and calculated work of separation for the solid-solid inte...

the performances of two-phase polymer-liquid pebax®/polyethylene glycol (peg) and three-phase polymer-liquid-solid pebax®/peg/mwnt thin film composite membranes for co2 and ch4 permeation were studied. the effect of temperature and mwnt/pebax® ratio on single gas (co2 and ch4) permeability was investigated. the permeation of both gases was measured at different temperatures from 303 to 323 ˚k. ...

Separation methods are being applied more extensively than ever before, particularly in trace analysis. Some of the more interesting procedures which have recently been proposed in solvent extraction and ion-exchange chromatography are reviewed, together with other new procedures for separation based on classical techniques. The possibilities of gas chromatographic separation of metal chelates ...

in this study, an attempt has been made to study the effect of bi2o3 addition as nucleating agent on the liquid-liquid phase separation, crystallization and dielectric properties of samples prepared by sintering and crystallization of powdered glass in pbo-tio2-b2o3-sio2 glass-ceramic system using dta, xrd, sem and lcr techniques. the results showed that the addition of bi2o3 resulted in a quit...

Centrifugal partition chromatography (CPC), pioneered by Ito in 1964, is a liquid–liquid chromatography without a sorbent, requiring two immiscible solvent phases. This is basically an outgrowth of countercurrent distribution, as developed by Craig and Post (1). In the most distinct variant of CPC, one liquid phase remains stationary while the second solvent phase passes through the stationary ...

Solid-phase extraction (SPE) is an effective tool for the preconcentration of trace elements and their separation from various sample constituents. Octadecyl and other alkyl-bonded silica gels are most widely used for these purposes. The fundamentals of the SPE of inorganic ions are reviewed and compared with those of related techniques (liquid-liquid extraction and reversed-phase liquid chroma...

Analytical methods published in the last 20 years for the extraction, chromatographic separation, and quantification of alkylphenol ethoxylates (APEO) and related compounds in environmental samples are reviewed. Examples of various isolation and preconcentration techniques for water, effluent, sediment and sludge are presented. This includes procedures from the classical liquid-liquid and Soxhl...