Tin doped In2S3 films were grown by the chemical spray pyrolysis (CSP) method using the pneumatic spray set-up and compressed air as a carrier gas. The spraying solution contained indium chloride (InCl3), thiourea [CS(NH2)2] and (SnCl4) at a molar ratio of S/In = 2.5. The deposition was carried out at 350 °C on glass substrates. The Sn doping level was changed with Sn/In = 0-8 % in solution. Th...

In  this paper  thin  films of  tin sulfide (SnS) were deposited on  the glass substrates using spray pyrolysis method with the substrate temperatures in the range of 400–600℃, keeping the other deposition parameters constant. In  this work  the characteristic of SnS  thin  films  investigated. The XRD pattern and optical transmittance of thin films also are discussed. With the change in concen...

SrCoO.~FeO, (SCF) is an attractive material for oxygen separation membranes and for use in catalytic membrane reactors. While tubes of this material have been prepared by extrusion, further improvements in oxygen transport performance may be gained by preparing thinner membranes on porous supports. In this paper, we will discuss the deposition of thick films by spray deposition and centrifugal ...

The evolution of zinc oxide nanostructures grown on graphene by alcohol-assisted ultrasonic spray pyrolysis was investigated. The evolution of structures is strongly depended on pyrolysis parameters, i.e., precursor molarity, precursor flow rate, precursor injection/deposition time, and substrate temperature. Field-effect scanning electron microscope analysis, energy dispersive X-ray spectrosco...

SnO2 nanocrystalline thinfilms were prepared by spray pyrolysis method on glass substrates at 375, 400, 425, 450 and 500oC. Structural, optical and electrical properties of these films were studied by XRD, UVVisible and Four-probe methods. The change in electrical conductivity, band gap and optical transmittance was found to be a function of the change in lattice parameters ∆a and ∆c. The sampl...

The effect of Zn:Se ratio on the photoconducting properties of ZnSe thin films has been studied. The ZnSe thin films have been deposited onto glass substrates by the spray pyrolysis method, the substrate temperature kept at 430◦C using mixed aqueous solutions of ZnCl2 and SeO2 with different Zn:Se ratios. Their electrical, structural, and photoconductivity properties have been studied. The valu...