نتایج جستجو برای: stabilized zirconia ysz coating
تعداد نتایج: 77012 فیلتر نتایج به سال:
In the present work, 5 wt.% and 10 yttria-stabilized zirconia (YSZ) nanoparticles were reinforced in Ni-20Cr powder deposited on boiler tube steel using a high-velocity oxy-fuel spraying process. The effect of YSZ reinforcement microhardness, surface roughness porosity was investigated. hardness highest for nanocomposite coating with found to increase decrease porosity. microstructure elements ...
Glassy deposits mainly comprising of calcium–magnesium–alumina–silicate (CMAS) accelerate the spallation thermal barrier coatings (TBCs). In this work, an Al2O3 layer was produced on yttria-stabilized zirconia (YSZ) coating by plasma spray–physical vapor deposition (PS–PVD). The effects processing parameters during PS–PVD process microstructures deposited were investigated. A homogeneous with p...
La2Zr2O7 (LZO) films were grown on different buffer architectures by radio frequency magnetron sputtering for the large-scale application of YBa2Cu3O7-x (YBCO)-coated conductors. The three different buffer architectures were cerium oxide (CeO2), yttria-stabilized zirconia (YSZ)/CeO2, and CeO2/YSZ/CeO2. The microstructure and surface morphology of the LZO film were studied by X-ray diffraction, ...
Porous composites of Sr0.88Y0.08TiO3-δ (YST) and yttria-stabilized zirconia (YSZ) were formed by tapecasting methods and examined as potential anodes for SOFC. Even after calcination to 1773 K, the YSZ and YST crystallites remain as separate phases, as demonstrated by XRD and SEM with EDX analysis. Furthermore, it was possible to fabricate anode-supported electrolytes by calcination of a bilaye...
thermal barrier coatings (tbcs) are used to provide thermal insulation to the hot section components of gas turbines in order to enhance the operating temperature and turbine efficiency. hot corrosion and thermal shocks are the main destructive factors in tbcs which comes as a result of oxygen and molten salt diffusion into the coating. in this thesis atmospheric plasma spraying was used to dep...
This study aimed to compare the phase changes and morphology of yttria-stabilized zirconium oxide powders (YSZ) synthesized by co-precipitation and molten salt methods. Ammonia precipitating agent was used for the synthesis of YSZ powder by co-precipitation method and a mixture of sodium carbonate and potassium carbonate salts was used as a molten salt in the molten salt method. Samples were ch...
Ceramic membrane composites consisting of a coarse porous a-alumina or two-layer porous alumina membrane support and an oxygen semipermeable gas tight thin (0.2-5 pm) yttria stabilized zirconia (YSZ) film are prepared by the electrochemical vapor deposition (EVD) method. The minimum gastight thickness of the YSZ films depends strongly on the average pore size of the support on which the films a...
This work focuses on understanding the oxygen-ion transport through mixed Grain Boundaries (GBs) present in yttria-stabilized zirconia (YSZ), a common solid oxide fuel cells (SOFCs) electrolyte.
Hydroxyapatite (HA) coatings on metallic implants have been extensively used in orthopedic applications to improve tissue-implant interactions, enhance their biocompatibility, and functionality. However, the expensive synthetic HA is most widely bioceramic for implant coatings, leading high costs. Hence, this research explored potential of an inexpensive biogenic derived from fish scales FsHA/y...
Composites of yttria-stabilized zirconia (YSZ) with Sr-doped LaCrO3 (LSC) and Sr-doped LaMnO3 (LSM) were prepared by impregnation of a porous YSZ matrix with aqueous solutions of the appropriate metal salts, followed by sintering to various temperatures. XRD measurements showed that perovskite phases formed after sintering at 1073 K, a temperature well below that at which solid-state reactions ...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید