This paper investigated the effects of combining fibers with self-consolidating concrete (SCC). 12 series of test specimens were prepared using three kinds of fibers including steel, polyphenylene sulfide (PPS) and glass fibers with four different volumes fractions and one specimen without fibers as a reference sample. All plans were subjected to fresh concrete tests. For mechanical behavior of...

Fiber reinforced concrete (FRC) has been widely used due to its advantages over plain concrete such as high energy absorption, post cracking behaviour, flexural and impact strength and arresting shrinkage cracks. But there is a weak zone between fibers and paste in fiber reinforced concretes and this weak zone is full of porosity, especially in hybrid fiber reinforced concretes. So it is necess...

In the extended use of concrete in military applications, runway pavements and infrastructures, is subjected to heavy impact loads that vary both velocity intensity. The addition fibers high performance (HPC) can overcome its shortcomings such as brittleness, shrinkage less resistance also improve ductile behavior energy absorption capacity. this study, development on strengthening HPC using st...

Abstract Polypropylene, steel, and carbon fibers are used to increase the ductility toughness of concrete materials. In recent years, studies on use natural have increasingly continued. Among fibers, hemp fiber has highest tensile strength value. The aim this study was discuss present results experimental cement-based shives mortars. Another is in construction field by using more economical fib...

polypropylene / polystyrene blends containing montmorillonite (mmt) were prepared using a twin screw extruder followed by fiber spinning. the melt intercalation of pp and ps alloys was carried out in the presence of a compatibilizer such as maleic anhydride-g-polypropylene (mpp). the crystallization morphology, thermal behaviors and mechanical properties of polypropylene/polystyrene (pp/ps) nan...

Melt spinning of polypropylene fibers containing silver and zinc nanoparticles was investigated. The nanometals were generally uniformly dispersed in polypropylene, but aggregation of these materials was observed on fiber surface and in fiber cross-sections. The mechanical properties of the resulted composite fibers with low concentration of nanometal were comparable to those for the control P...

Attempts were made to modify polypropylene fibers by melt blending with polyethylene terephthalate in order to enhance the dyeability of the resultant fiber. Five blends of polypropylene/polyethylene terephthalate/compatibilizer were prepared and subsequently spun into fibers. Three disperse dyes were used to dye such modified fibers at boiling and 130 °C. The dyeing performance of the blend fi...

Brittleness, which was the inherent weakness in High Strength Concrete (HSC), can be avoided by reinforcing the concrete with discontinuous fibers. Reinforcing HSC with more than one fiber is advantageous in an overall improvement of the mechanical performance of the composite. In this experimental study, Hybrid Fiber Reinforced High Strength Concrete (HyFR-HSC) mixes were formed by blending si...