The detection of bubbles in liquid metals is important for many technical applications. The opaqueness and the high temperature of liquid metals set high demands on the measurement system. The high electrical conductivity of the liquid metal can be exploited for contactless methods based on electromagnetic induction. We will present a measurement system which consists of one excitation coil and...

Hydrogen gas has been widely recognized as an environmentally clean and renewable energy fuel, and it provides a way to reduce greenhouse gas and air pollution emission. A great deal of effort has been made to develop new techniques in the field of hydrogen energy, including hydrogen production, storage, and infrastructure. Recently a metallic gasket, which is made of type 316L stainless steel,...

1. ABSTRACT It has been about fifty years ago since the first unplasticized poly(vinyl chloride) (uPVC) pipes were installed for use in gas distribution purposes. Currently, about 22,500 km of uPVC is still in use in the Dutch gas distribution network. The pipes were originally designed for a lifetime of 50 years, but due to positive experiences the question arises if (and how long) the lifetim...

in this paper, two api x70 steel pipes (with spiral seam weld) of 56 inch outside diameter and 0.780 inch wall thickness were girth welded first. next, hole drilling tests were conducted for strain measurement on the surfaces of the pipes. the values of residual stresses on the internal and external surfaces of the pipe were determined, from strain data using astm 837 standard. the experimental...

During continuous casting, especially of modern steel grades or at higher casting velocities, undesired oscillating disturbances may occur, which strongly impair the quality of the final product, or even lead to costly plant downtime. In this paper, both a novel model based explanation of these level oscillations in terms of unstable internal feedback and delay time, as well as a corresponding ...

A dent is a gross distortion of the pipe cross-section. Dent depth is defined as the maximum reduction in the diameter of the pipe compared to the original diameter. Pipeline dent finite element (FE) simulation and theoretical analysis are conducted in this paper to develop an understanding of the geometric characteristics and strain distribution in the pressurized dented pipe. Based on the res...

The predominant microorganisms in samples taken from shower heads in residences in the Korean city "N" were Stenotrophomonas maltophilia, Sphingomonas paucimobilis, Acidovorax temperans, and Microbacterium lacticum. Legionella was not detected in this case. The volatile organic compounds (VOCs) vinylacetate, NN-DMA, cis-1,2-dichloroethylene, epichlorohydrin, and styrene were measured in five ty...

Oil and gas transmission pipelines are critical items of infrastructure in providing energy sources to regions and countries. Steel pipes are commonly used which can be subject to both internal and external corrosion. This paper presents an advanced nondestructive inspection technique for detection of oil-gas pipeline corrosion defect. The Pulsed Eddy Current (PEC) method has been successfully ...

The paper describes the work aimed at controllable loop heat pipe (CLHP) operation study when noncondensable gases (NCGs) are injected. In this work, the effect of NCG on the operating performance of an ammonia– stainless steel CLHP was experimentally investigated. Nitrogen was selected as NCG, and the steady-state operating characteristics of the CLHP with NCG was systematically studied for di...

The monitoring of liquid-filled tubes with respect to the formation of soft deposition layers such as biofilms on the inner walls calls for non-invasive and long-term stable sensors, which can be attached to existing pipe structures. For this task a method is developed, which uses an ultrasonic clamp-on device. This method is based on the impact of such deposition layers on the propagation of c...