the use of methods employed for estimating the strength and toughness of composites reduces the trial-and-error in their design. the strength of interface between reinforcement and matrix and the effective surface of pulled-out particles have great influences on toughness and strength of these composites. in this study, a model was proposed to estimate the interface strength and matrix strength...

A finite element model is developed to analyse, as a function of volume fraction, the effects of reinforcement geometry and arrangement within a timber beam. The model is directly validated against experimental equivalents and found to never be mismatched by more than 8% in respect to yield strength predictions. Yield strength increases linearly as a function of increasing reinforcement volume ...

The temperature field analysis method of steel tube reinforced columns under fire by finite element analysis software ABAQUS is proposed in this paper. The theoretical method is validated by tests, and the calculated results agree well with those of tests. On the basis of that, the influencing laws of temperature rising time; section perimeter; steel reinforcement ratio and sectional core area ...

In tall buildings the reinforced concrete (RC) shear wall is one of the predominant structural components used to resist lateral loads induced by earthquakes around the world. Previous research demonstrated that shear walls displayed a sudden loss in lateral capacity due to the wall corner and web crushing in the plastic zone. In addition, it was found that large shear distortions in shear wall...

Due to life-cycle costs considerations, the Federal Highway Administration has required that all their new bridge structures have a service life of more than 75 years. The practical use of adequate concrete cover, low water/cement ratio, and corrosion inhibitors and admixtures are not enough to satisfy this requirement. Corrosion still affects the reinforcing steel through the diffusion of chlo...

C ommercially available fiberbased reinforcement for concrete is made of carbon, aramid, or glass filament fibers impregnated in a resin. Some aramid fiber reinforcement consists of aramid filaments without a resin matrix. For general applications, the most important feature of fiber-based reinforcement is its resistance to corrosion, which makes it ideal for reinforcing concrete exposed to hig...

While significant advances have been made in concrete materials and in concrete structures over the last decade, research in materials and in structural engineering are often carried out separately. As a result, opportunities in major leaps in structural performance may be missed, or research emphasis in materials development may be misguided. This paper introduces the concept of integrated str...

Corrosion of the steel reinforcement in concrete requires manual and costly repair procedures to prevent premature failure of constructions. Although preventive measures during the construction phase are often implemented but early corrosion may still occur. The primary reason for premature corrosion is crack formation in the concrete cover. Larger cracks as well as a network of finer cracks al...

For the development of any modern economy, steel is crucial and is considered to be the backbone of human civilisation. The domestic steel industries are facing new challenges. Some of these relate to the trade barriers in the developed markets and certain structural problems due to the high cost of commissioning new projects. Thermo Mechanically Treated (TMT) steel bars are presently used for ...

Although studies on RC beams under shear have a history record of more than 100 years, many important issues in this context still remain that have evaded attention. The aim of the current study is to study a number of these less investigated aspects of the behavior of RC beams under shear. For this purpose, and based on the modified compression field theory, a computer program has been writte...