Although most biomaterials are characterized by strong stiffness nonlinearities, the majority of studies of plant biomechanics and structural dynamics focus on the linear elastic range of their behavior. In this paper, the effects of hardening (elastic modulus increases with strain) and softening (elastic modulus decreases with strain) nonlinearities on the structural dynamics of plant stems ar...

dynamic recrystallization, drx, behaviour of a precipitation hardened, ph, stainless steel was studied in connection with microstructural developments in a compression test. the experimental results showed that the dominant mechanism of softening is drx, but at high strain rates and low temperatures, ie, high zener-holman parameter, z, work hardening and dynamic recovery, drv, produced a pancke...

This paper proposes a framework for the constitutive model based on the semi-micromechanical aspects of plasticity, including damage progress for simulating behavior of concrete under multiaxial loading. This model is aimed to be used in plastic and fracture analysis of both regular and reinforced concrete structures, for the framework of sample plane crack approach. This model uses multilamina...

In this study, a Ti–33Zr–12Al–6V alloy was prepared, and its work hardening softening mechanisms were investigated via tensile tests conducted at room temperature. The interaction between the dislocations strain-induced martensite (SIM) results in hardening; whereas, shearing of grain boundaries by for entering adjacent grains softening, which occurs when logarithmic strains is 5.8% 7.6%. Work ...

The damping characteristics of Ti50Ni50-xCux (x = 0~30 at.%) shape memory alloys (SMAs) at a low frequency have been studied using a dynamic mechanical analyzer. The magnitude of the tan δ value and the values of the storage modulus (E₀) softening/hardening and the strain variation exhibited in B2↔B19 transformation are all higher than those in B2↔B19' transformation. The larger E₀ softening/ha...

We studied three-dimensional transient large coupled thermomechanical deformations of a polycarbonate (PC) plate with a through-the-thickness inhomogeneity at its centroid. The PC exhibits strain softening followed by strain hardening and its elastic moduli are taken to be functions of strain rate and temperature. The inhomogeneity is either a void or a region of initial temperature higher than...

dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500c. stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500c, and smooth flow at the other temperatures. both yield and ultimate tensile strengths increased with increasing testing temperature up to about 4500c and then decreased at h...

The changes in the mechanical properties and microstructure of nanocrystalline Cu-Zn alloys deformed by cryorolling during low temperature annealing and the post-process deformation were studied. The deformed Cu-Zn alloys exhibited uncommon anneal hardening and deformation softening behaviors. The degree of anneal hardening and deformation softening increased with the addition of the solute ato...

The effect of intrinsic ripples on the mechanical response of the graphene monolayer is investigated under uniaxial loading using molecular dynamics (MD) simulations with a focus on nonlinear behavior at a small strain. The calculated stress-strain response shows a nonlinear relation through the entire range without constant slopes as a result of the competition between ripple softening and bon...