behaviors of stress corrosion cracking (scc)in martensitic stainless steel(aisi 420) and low carbon austenitic stainless steel (aisi 316l) have been compared under different conditions of temperature, environment (mgcl2), and strain rate. the results show that decreasing strain rate has detrimental effect on mechanical properties of both steels, including their strength and ductility. fractogra...

Three low-carbon bainitic steels were designed to investigate the effects of Cr and Al addition on bainitic transformation, microstructures, and properties by metallographic method and dilatometry. The results show that compared with the base steel without Cr and Al addition, only Cr addition is effective for improving the strength of low-carbon bainitic steel by increasing the amount of bainit...

Neural network predictions suggested that strength of a high strength steel weld metal with 7 wt. % nickel and 0.5 wt. % manganese could be increased significantly at moderate expense to impact toughness by additions of carbon. Based on this, three experimental weld metals were produced with carbon levels between 0.03 and 0.11 wt. %. Mechanical test results were in agreement with predictions. W...

Neural network predictions suggested that the strength of a high strength steel weldmetal with 7 wt-% nickel and 0.5 wt-% manganese could be increased significantly at moderate expense to impact toughness by additions of carbon. Based on this, three experimental weldmetals were produced with carbon contents between 0.03 and 0.11 wt-%. Mechanical test results were in agreement with predictions. ...

A combination of neural networks and genetic algorithms has been used to design a TRIP assisted steel in which the silicon concentration is kept low. In this context, the steel has a novel microstructure consisting of d ferrite dendrites and a residual phase which at high temperatures is austenite. This austenite can, with appropriate heat treatment, evolve into a mixture of bainitic ferrite an...

High-temperature properties of the continually cast low carbon steel slabs are tested on various equipments [1 7]. The high temperature tensile strength test is the most used one and the primary evaluated quantity, plasticity, is mostly assessed by reduction of area values. Several heating techniques are used for high temperature tensile strength tests and the testing is performed at various de...

Several deficient steel structural members require to be strengthened all over the world. In this article, horizontal defects were generated at three locations (top, middle, and bottom) on the middle element and the middle of the side element. Consequently, the effects of the location of such defects on axial behavior of Carbon Fiber Reinforced Polymer (CFRP) strengthened steel Square Hollow Se...

Carbon fiber reinforced polymers strengthen steel structural elements. These structural elements are normally subjected to static, dynamic and fatigue loadings during their life-time. CFRP laminate is commonly used structures under the subjected loads. A number of focused on the characteristics of CFRP sheets members under static, dynamic and fatigue loadings. is a gap in understanding the bond...

A method for finding the microstructural parameters of low-carbon steel using its metallographic images is proposed. It allows to determine the following parameters: the ratio of perlite to ferrite phases, the parameters of grains of crystallites and their mutual arrangement; the degree of granularity of the pearlite phases. The method is aimed at predicting the strength characteristics of stee...

low carbon steel samples were both shot into and inoculated with titanium in order to improve mechanical properties such as strength and toughness. sem observations and x-ray analyses revealed that titanium nitride and titanium carbonitride precipitates being scattered in the ferrite substrate reduce the grain size in all as-cast, heat-treated and as-rolled cases. the growth of the grains at hi...