Easily prepared nanoZnO was found to be as an efficient catalyst in the synthesis of 1,4-DHPs via four-component reaction of 1,3-dicarbonyls, aldehydes and ammonium carbonate in water at 60 °C. The prepared nanoZnO was characterized by XRD and FT-IR analysis, while the determined specific surface area of nano catalyst by BET method was 33 m2/g.

CuO-CeO2 nanocomposite is reported as a green recyclable catalyst for the chemoselective synthesis of pentaerythritol diacetals from aromatic aldehydes under solvent-free conditions. The catalyst was synthesized by co-precipitation method and characterized by XRD, BET specific surface area, FESEM and EDS analysis. This procedure provides some advantages such as simple work-up, clean procedure, ...

In this research, preparation of Zn0.95Ni0.04Co0.01O/PANI (polyaniline) (0.5%, 1% and 1.5% PANI) nanocomposites was performed by synthesis of pure polyaniline and adsorption of resulted organic chainson the structure of Zn0.95Ni0.04Co0.01O nano particles. The as-prepared samples was characterized by X-raydiffraction (XRD), fourier transform infrared (FTIR), field emission scan...

in this work, bsea-sba-15 was prepared for the first time, which was prepared by covalently anchoring schiff-base compound (n,n´-bis(salicylidene)ethylenediamine (bsea) on sba-15 by hydrothermal method. the structure and physicochemical properties were determined by elemental analysis, xrd, nitrogen adsorption–desorption, thermogravimetric analysis and ftir spectroscopy, sem, bet surface area a...

Problems, which may arise when low-temperature nitrogen adsorption is used for the characterisation of porous materials, are discussed in this review. Continuous or discontinuous manometric techniques can be employed for nitrogen adsorption measurements at 77 K. For pore structure analysis, the nitrogen adsorption–desorption isotherms should be determined over the widest possible range of relat...

Lung deposition of multi-walled carbon nanotubes (MWCNT) induces pulmonary toxicity. Commercial MWCNT vary greatly in physicochemical properties and consequently in biological effects. To identify determinants of MWCNT-induced toxicity, we analyzed the effects of pulmonary exposure to 10 commercial MWCNT (supplied in three groups of different dimensions, with one pristine and two/three surface ...

In this study, two cobalt based catalyst samples were prepared on titania and titania nanotubes supports using the deposition precipitation method. Their structural configurations were characterized and compared using BET, and TRP analyses. The BET analysis showed that the surface area of TiO2 is much higher than that of TNT which was due to their structural differences. Analyses of the results...

This work investigates the influence of reaction time (ranging from 12 to 96 h) on the characteristics of zinc stannate (Zn2SnO4) nanoparticles obtained by the hydrothermal method at 200°C. The nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), surface area measurements (BET) and infrared spectroscopy (IR). The results showed that the reaction time ...

−Microsilica, one kind of industrial solid waste material, was utilized firstly to prepare a carbon-microsilica composite adsorbent (CMS). The prepared adsorbent was characterized with XPS, SEM and Gas sorption experiments. The results indicated the SO 3 H groups, which are very effective in capturing cationic organic dye, were introduced onto the surface of CMS; the Brunauer-Emmett-Teller (BET...

La1-xSrxAlO3 (x=0 to 0.4) perovskite materials were synthesized by the reverse strike co-precipitation method and their soot oxidation activity was evaluated. All the catalysts synthesized were characterized using XRD, BET specific surface area, FESEM and XPS techniques. As analyzed by XRD, La1-xSrxAlO3 <...