A technique to heal a fatigue crack in austenitic stainless steel SUS316 by applying a controlled, high-density pulsed current was developed. A surface-activated pre-coating (SAPC), which eliminates the oxide layer and coats a Ni film on the crack surface, was used to improve the adhesion between crack surfaces. Cracks were observed by scanning electron microscopy before and after the applicati...

An electromagnetic NDE technique for measuring the crack ooening displacement of surface fatigue cracks is described. A ferromagnetic resonance probe utilizing yttrium-iron-garnet was used to induce eddy currents in an aluminum plate. The crack opening disolacement of a semi-elliptical fatigue crack evaluated at the surface was measured optically at several values of bending stress on the speci...

In this work, XFEM is employed to obtain the stress intensity factors (SIFs) of a semi elliptical part through thickness axial crack. In XFEM, additional functions are employed to enrich the displacement approximation using partition of unity approach. Level set functions are approximated using higher order shape functions in the crack front elements to ensure the accurate modeling of the crack...

The corrosion fatigue crack growth characteristics of small (>35pm) surface and corner cracks in aluminum alloy 7075 is established. The early stage of crack growth is studied by performing in situ long focal length microscope (500X) crack length measurements in laboratory air and 1% NaCl environments. To quantify the “small crack effect” in the corrosive environment, the corrosion fatigue crac...

Abstract Previous research has indicated that the surface wave transmission (SWT) method can be used to measure the depth of a single surface-breaking crack in concrete. In this paper, the authors extend the SWT method to evaluation of distributed cracks in concrete. First, scattering field of surface waves caused by distributed cracks in concrete was investigated using numerical simulation. Se...

DC electric potential technique has been used to monitor crack growth in conductive materials. A constant DC current is passed through these materials and the crack length is measured through the changes in the electrical voltage at the crack mouth. However, this method is not applicable in crack growth measurement in nonconductive materials or adhesively bonded joints. For these materials, a n...

An important task in mixed-mode fracture analysis and prediction is the simulation of crack growth under mixed-mode conditions. To complete such a task, one must have (a) a computer code capable of handling the kinematics of general crack growth and determining the stress and deformation states during crack growth, and (b) a fracture criterion that can properly predict the instant and direction...

In this paper, the stress intensity factor (SIF) variations along an arbitrarily developing crack front, the non-planar fatigue-crack growth patterns, and the fatigue life of a round bar with an initially straight-fronted surface crack, are studied by employing the 3D symmetric Galerkin boundary element method-finite element method (SGBEM-FEM) alternating method. Different loading cases, involv...

The natural initiation and growth of short cracks in Inconel 718 U-notch specimens has been studied at 600C in air. U notches were introduced through broaching, and hardness traces and optical microscopy on cross sections through the U notch broaching showed that the broaching process had introduced a deformed, work hardened layer. Fatigue tests were conducted under load control using a 1-1-1-1...

The factor (1/2)(O+I) multiplying 2w appears (o-I) (o-3I) > • (2-•)3⁄4•/2 (l-v) c (1) because the body is assumed to be linearly elastic, and Scr denotes the crack surface (his equation (13), where • is the Poisson ratio, (which Dienes denotes as S in the body of his • is the shear modulus, and 2•c23⁄4 is the "surpaper but as S i in his Appendix A, in which S face energy" of the fracture) seems...