Carbon nanotubes (CNTs) have excellent chemical durability, mechanical strength and electrical properties. Therefore, there is interest in CNTs for not only electrical and mechanical applications, but also biological and medical applications. We coated titanium, a common material for dental implants, with multiwalled carbon nanotubes (MWCNTs). First, titanium was aminated and covered with colla...

The ions released from conventional and high-copper amalgams in contact with titanium were quantitatively analyzed in a 0.9% NaCl solution at 37 degrees C when the surface area ratio of titanium/amalgam was set up as 1/10, 1/1, or 10/1. The corrosion potentials of the amalgams and titanium were measured under the same conditions. Surface analyses on the amalgams were also employed using SEM wit...

and porcelain-fused-to-metal restorations instead of gold or silver alloys. This tendency seems to be the same a]1 over the world, However, the expanded use of nickel-containing base metal alloys in dentistry has raised questions concerning their biological s fety, namely, carcinogenic and sensitivity risks.i) On the other hand, since pure titanium or titanium-based alloys have excellent biocom...

ni-hard4 white cast iron is excellent wear resistant material and has been widely used in wearaffected equipment operated under extreme conditions, such as in mineral processing, cement, copper and iron manufacturing. in this study the effect of titanium addition (1.2, 0.7 and 0.2 wt.%) to the ni-hard 4 cast iron with the nominal composition of si= 1.5%, mn=0.5%, c=3%, p=0.05%, s= 0.05%, mo= 0....

in this research, the thin films of n-s doped titanium dioxide (tio2) were successfully prepared by simple sol-gel method in the presence of tetrabutylorthotitanate as a starting reagent. furthermore, titanium dioxide (tio2) was functionalized with thiourea. furthermore, n-s doped titanium dioxides (nsto) were fixed on glass balls by glass balls fixed-bed reactor system. besides, the effect of ...

In this study the use titanium and tungsten as alternatives to the noble metals in the jewellery industry was investigated. The degradation of titanium and tungsten were compared to that of gold, used as reference. Alternate immersion tests were performed in 3.5% sodium chloride and artificial perspiration. The metals’ abrasion resistance with respect to textile fabrics was determined. ...

AIM The aim of the study was to comparatively analyze the in vitro cell adhesion between nano coated titanium dioxide, and calcium hydroxyapatite (HA) coated titanium samples. MATERIALS AND METHODS Nano coated titanium dioxide, and calcium HA were coated onto the titanium samples by drop casting with NAFION membrane and cell culture was done by seeding human osteoblastic sarcoma cells on the ...

INTRODUCTION Treatment of osteoporotic fractures is still challenging and an urgent need exists for new materials, better adapted to osteoporotic bone by adjusted Young's modulus, appropriate surface modification and pharmaceuticals. MATERIALS AND METHODS Titanium-40-niobium alloys, mechanically ground or additionally etched and titanium-6-aluminium-4-vanadium were analyzed in combination wit...

TITANIUM is a low-density element (approximately 60% of the density of steel and superalloys) that can be strengthened greatly by alloying and deformation processing. (Characteristic properties of elemental titanium are given in Table 2.1.) Titanium is nonmagnetic and has good heat-transfer properties. Its coefficient of thermal expansion is somewhat lower than that of steel and less than half ...

INTRODUCTION: The majority of interbody devices for spine fusion are PEEK. Other interbody devices use a rough 2D titanium surface or full porous titanium or tantalum cores, which have been shown in-vitro and in-vivo to promote osteoinduction and osteointegration, respectively. Combining the increased osteogenic environment that titanium provides and the minimized subsidence and radiolucency fr...