This study reports the deposition of cuprous oxide [Cu2O] onto titanium dioxide [TiO2] nanowires [NWs] prepared on TiO2/glass templates. The average length and average diameter of these thermally oxidized and evaporated TiO2 NWs are 0.1 to 0.4 μm and 30 to 100 nm, respectively. The deposited Cu2O fills gaps between the TiO2 NWs with good step coverage to form nanoshells surrounding the TiO2 cor...

A new type of nonstoichiometric rutile titanium dioxide (TiO2) film with around 15 at% oxygen vacancies homogeneously distributed throughout the bulk was prepared. The resultant films, when used as a photoelectrode, showed a photoelectrochemical water splitting activity 1.7 times that of stoichiometric TiO2 at a bias of 0.9 V vs. Ag/AgCl. This is believed to result from the synergistic effect o...

Co-doped titanium dioxide (TiO2) nanorods with different doping concentrations were fabricated by a molten salt method. It is found that the morphology of TiO2 changes from nanorods to nanoparticles with increasing doping concentration. The mechanism for the structure and phase evolution is investigated in detail. Undoped TiO2 nanorods show strong ferromagnetism at room temperature, whereas inc...

In this work firstly ZnO nanoparticles were synthesized via a simple precipitation method. At the second step titanium dioxide and silicon dioxide shell were synthesized on the core. For preparation ZnO-TiO2-SiO2 the sol product was calcinated at 500 ºC for 2h. Properties of the product were examined by X-raydiffraction pattern (XRD), scanning electron microscope (SEM) and Fourier transform inf...

Nanosized titanium dioxide (nano-TiO2) particles are used in diverse products and devices, including photocatalytic water splitting and solar cells whose successful commercialization is still facing scientific and technologi-

Columns packed with microsized titanium dioxide particles have been used effectively as precolumns for enriching phosphopeptides from complex mixtures. Nanosized titanium dioxide particles have a higher specific surface area and, hence, potentially higher trapping capacities toward phosphopeptides than do microsized particles. Thus, in this study, we employed TiO2-coated magnetic (Fe3O4/TiO2 co...

In this paper, silica gel supported titanium dioxide particles (TiO2/SiO2) prepared by acid-catalyzed sol–gel method was as photocatalyst in the degradation of acid orange 7 (AO7) in water under visible light irradiation. The particles were characterized by X-ray diffraction, BET specific surface area determination, and point of zero charge measurement. The supported catalyst had large surface ...

The Minnesota Nano Center’s Keller Hall facility includes an atomic layer deposition (ALD) machine that is capable of depositing uniform alumina (Al2O3), hafnium oxide (HfO2), silicon dioxide (SiO2), zinc oxide (ZnO), and titanium dioxide (TiO2). ALD works by building alternate layers on a film using two different precursor gases – one usually supplying the metallic atoms and water vapor (H2O) ...

In the current research project, sol-gel electrophoresis technique was utilized to grow titanium dioxide (TiO2) nanotubes. A titanium sol was prepared using organometallic precursors of titanium to fill the template channels. The prepared solwas driven into nanopores of porous anodic aluminum oxide templates under the influence of a DC electric field to form nanotubes on the pore walls. Tube fo...

Vanadium dioxide (VO2) is a Mott phase transition compound that can be applied as a thermochromic smart material for energy saving and comfort, and titanium dioxide (TiO2) is a well-known photocatalyst for self-cleaning coatings. In this paper, we report a VO2@TiO2 core-shell structure, in which the VO2 nanorod core exhibits a remarkable modulation ability for solar infrared light, and the TiO2...