Nanostructured titanium nitride (TiN) films with varying porosity were prepared by the oblique angle deposition technique (OAD). The porosity of films increases as the deposition angle becomes larger. The film obtained at an incident angle of 85° exhibits the best catalytic activity and sensitivity to hydrogen peroxide (H2O2). This could be attributed to its largest contact area with the electr...

Nanocomposite films of metal nitrides such as TiN/Si3N4, TiN/BN, and CrN/AlN have attracted substantial attention as coating materials for improving hardness and saving rare metals. It is difficult to prepare composite films consisting of nitride and oxide by conventional reactive sputtering methods. Nose et al. developed a differential pumping cosputtering (DPCS) system, which can fabricate di...

This study aimed to develop a contamination-free porous titanium scaffold by a plasma-activated sintering within an originally developed TiN-coated graphite mold. The surface of porous titanium sheet with or without a coated graphite mold was characterized. The cell adhesion property of porous titanium sheet was also evaluated in this study. The peak of TiC was detected on the titanium sheet pr...

Coatings such as diamond-like carbon (DLC) and titanium nitride (TiN) are employed in joint implants due to their excellent tribological properties. Recently, graphite-like carbon (GLC) and tantalum (Ta) have been proven to have good potential as coating as they possess mechanical properties similar to bones-high hardness and high flexibility. The purpose of this systematic literature review is...

The inner surface of the ring vacuum chambers of the US Spallation Neutron Source (SNS) will be coated with ~100 nm of Titanium Nitride (TiN). This is to minimize the secondary electron yield (SEY) from the chamber wall, and thus avoid the so-called e-p instability caused by electron multipacting as observed in a few high-intensity proton storage rings. Both DC sputtering and DCmagnetron sputte...

Most total knee replacement joints consist of a metal femoral component made from a cobalt-chromium- molybdenum (CoCrMo)-alloy and a tibial component with an ultrahigh molecular weight polyethylene (UHMWPE) bearing surface. Wear of the UHMWPE remains the primary disadvantage of these implants. The allergic potential ascribed to CoCrMo-alloys is a further concern. Other metallic alloys with and ...

PURPOSE In this work we investigated the suitability of electroconductive silicon nitride/titanium nitride composite for biomedical implantable devices with particular attention on the processing route that allows the net-shaping of complex components by electrical discharge machining (EDM). METHODS The composite, constituted mainly of a beta-Si3N4, dispersed TiN grains and a glassy grain bou...

AIM To evaluate the influence of the titanium nitride (TiN) coating on the results of a total knee arthroplasty (TKA). METHODS A total of 910 patients (338 men; 572 woman), with a mean age of 65 (range 36-94) undergoing 1031 primary TKAs were assessed. Clinical evaluation and patient-reported outcomes were gathered one year after surgery. The questionnaires included the Knee injury and Osteoa...

The purpose of this investigation was to develop a coating technique and to study the characteristics of titanium–aluminum nitride [(Ti,Al)N] films deposited on a base-metal alloy (Wiron88R) substrate. Titanium–aluminum nitride thin films were deposited on the alloy surface using a reactive radiofrequency sputtering method. The electrochemical properties of three specimens with and without coat...