The effect of the solvent butanol on the complexation reaction of allylacetoacetate (AAA) with titanium tetraethoxide. (Ti(OEt)4) in molar ratio Ti(OEt)4:AAA = 1:1 was investigated by C-NMR, FT-IR spectroscopy and elemental analysis. The investigation shows that some ethoxy groups that are attached to the titanium are substituted with butoxy groups. The hydrolytic stability of the allylacetoace...

Experimental cast titanium alloys containing 20 mass% chromium (Ti-20Cr) show preferable mechanical properties and a good corrosion resistance. This study evaluated the fretting corrosion behavior of Ti-20Cr. Ti-20Cr (n = 4) and commercially pure titanium (CP-Ti, n = 6) disk specimens were used. The fretting corrosion test was performed by electrochemical corrosion at 0.3 V in 0.9% saline solut...

This study investigated the machinability of experimental Ti-Ag alloys (5, 10, 20, and 30 mass% Ag) as a new dental titanium alloy candidate for CAD/CAM use. The alloys were slotted with a vertical milling machine and carbide square end mills under two cutting conditions. Machinability was evaluated through cutting force using a three-component force transducer fixed on the table of the milling...

Ti-MCM-41 was synthesized at pH 3, 7 and 11. The titanium content was determined by AAS and found to be 4%, 3.2% and 4.5%, respectively. In order to increase the titanium content in Ti-MCM-41, Ti(IV) ions were grafted onto TiMCM-41 using TiCl4 in toluene and Ti(OBu)4 in ethanol. The incorporation of Ti was determined to be 28% and 30%, respectively. The oxidation of olefins such as cyclopentene...

A characterization of Ti-Beta zeolites synthesized under various conditions as well as an investigation of their photocatalytic properties for the reduction of CO2 with H2O at 323 K to produce CH4 and CH3OH were carried out. In situ XAFS spectra measurements indicated that a highly dispersed tetrahedral titanium oxide species was present in the zeolite framework and an increase in the coordinat...

The oxidation state of titanium in titanium dioxide is commonly assumed to be +4. This assignment is based on the ionic approximation and is used ubiquitously to rationalize phenomena observed with TiO2. It implies a charge state +4 and that no further oxidation of the metal center is possible. We present a comprehensive electronic structure investigation of Ti ions, TiO2 molecules, and TiO2 bu...

Titanium-based implants have been widely used in orthopedic surgery; however, failures still occur. Our in vitro study has demonstrated that gentamicin-loaded, 80 nm-diameter nanotubes possessed both antibacterial and osteogenic activities. Thus, the aim of this study was to further investigate the in vivo anti-infection effect of the titanium implants with gentamicin-loaded nanotubes. Thirty-s...

In this research, tribological behavior of Ti-Ni-P intermetallic coatings on titanium substrates have been investigated under dry reciprocating conditions. Hardness profile testing results exhibit that high surface hardness has been attained and static indentation result shows that the intermetallic coating has better adhesion strength than the conventional ceramic coatings. In this respect, th...

In this research, tribological behavior of Ti-Ni-P intermetallic coatings on titanium substrates have been investigated under dry reciprocating conditions. Hardness profile testing results exhibit that high surface hardness has been attained and static indentation result shows that the intermetallic coating has better adhesion strength than the conventional ceramic coatings. In this respect, th...

Ti-MCM-41 was synthesized at pH 3, 7 and 11. The titanium content was determined by AAS and found to be 4%, 3.2% and 4.5%, respectively. In order to increase the titanium content in Ti-MCM-41, Ti(IV) ions were grafted onto Ti-MCM-41 using TiCl4 in toluene and Ti(OBu)4 in ethanol. The incorporation of Ti was determined to be 28% and 30%, respectively. The oxidation of olefins such as cyclopenten...