Interfaces between alloys simulating binders in WC-Co cemented carbides and tungsten carbide were examined on the micro-, nano-, and atomic-scale. The precipitation of fine WC grains and η-phase occurs at the interface of the alloy with the low carbon content. The precipitation of such grains almost does not occur in the alloy with the medium-low carbon content and does not take place in the al...

-A pressure-shear plate impact experiment is introduced to study time-resolved friction at interfaces subjected to high sliding speeds under relatively high normal pressures. The conditions of slip at the interface are varied by changing the surface roughness of the impacting plates and by varying the applied normal to shear stress ratio. The configuration offers the simplicity of allowing the ...

We analyze the initiation and propagation of adiabatic shear bands in a tungsten heavy alloy by modeling each constituent as a heat-conducting, microporous, isotropic, elastothermoviscoplastic material. The two constituents are assumed to be perfectly bonded to each other so that the temperature, heat flux, displacements, and surface tractions are continuous across an interface between a tungst...

Cracking is a major concern in welding aluminum alloys. Although weld solidification cracks can be eliminated through the addition of filler metal, the additives modify the alloy or base metal constituents and may not always be desirable. High-energy beam processes, such as electron beam welding, that result in minimal heat input reduce crack sensitivity, but their high cost limits their applic...

Tungsten alloys (WA) have been introduced in an attempt to find safer alternatives to depleted uranium and lead munitions. However, it is known that at least one alloy, 91% tungsten-6% nickel-3% cobalt (WNC-91-6-3), causes rhabdomyosarcomas when fragments are implanted in rat muscle. This raises concerns that shrapnel, if not surgically removable, may result in similar tumours in humans. There ...

This paper aims at optimization of process parameters for gas tungsten arc welding (GTAW) of sheet samples of Aluminium alloy AA1100 using AC wave with Argon as inert gas. Tensile properties of parent and welded specimens were determined as per ASTM-E8M standard. Taguchi approach was applied to determine most influential control parameters which will yield better tensile strength of the joints ...