In this paper computational analysis of circulating fluidized bed combustion using the fluent software is analysed. This work is concerned about gas–solid two-phase mixtures flowing upwards through the fast beds. The procedures studied are applicable to all types of fluidized-bed boilers. The type of information resulting from various ways of analyzing the pressure and temperature in fluidized ...

homogenous charge compression ignition (hcci) engines hold promise of high fuel efficiency and low emission levels for future green vehicles. but in contrast to gasoline and diesel engines, hcci engines suffer from lack of having direct means to initiate combustion. a combustion timing controller with robust tracking performance is the key requirement to leverage hcci application in production ...

The latest electronically controlled marine engines have a control system that allows the operator to view all essential parameters of engine in real conditions during operation. is connected electronic (ECS) through network, thus controlling engine. has various management and monitoring options. objective this paper was become familiar with specific factors affect operation optimize A model la...

The formation of smoke from a burning cigarette depends on a series of mechanisms, including generation of products by pyrolysis and combustion, aerosol formation, and physical mass transfer and filtration processes. Each mechanism, and their interactions, has a profound effect on the levels of chemical constituents in tobacco smoke. An enormous amount of research has been done on these subject...

ABSTRACT:A mathematical model for the performance prediction of an industrial glass furnace with six ports on each side was developed. This model comprises of two main sub-models for the combustion chamber and glass-melting tank. The first sub-model consists of the models for the combustion and the heat transfer model including, radiation, convection and conduction. The fuel combustion in a...

A noble low NOx combustion technology, based on partial oxidation combustion concept in a fuel rich combustion zone, is successfully applied in this research. The burner is designed such that a portion of fuel is heated and pre-vaporized in the furnace then injected into a fuel rich combustion zone so that a partial oxidation reaction occurs. The effects of equivalence ratio, thermal load, and ...

Demonstration of oxy-coal combustion is being planned for the old Youngdong unit 1 boiler in South Korea. The boiler is to be retrofitted to an opposed-wall-firing type with 100 MWe capacity for demonstration of oxy-fuel combustion while maintaining the original furnace shape of downshot firing. It is to be operated under oxy-coal combustion mode during demonstration periods while continuing co...

A numerical study of the supercritical combustion of a liquid oxygen (LOX) droplet in a stagnant environment of hot hydrogen is carried out with a detailed chemistry model. Special attention is devoted to ignition process and diffusion flame structure. Ignition consists typically of the propagation of a premixed flame which is initiated in the H,-rich hot side. Propagation takes place in a nonh...

main purpose of current study is development of a new multi zone model for direct injection diesel engines. zone configuration is based on conical shape of spray. siebers’s correlation is used for spray cone angle calculation. experimental data are used for calculation of fuel inlet mass flow rate. fuel diffusion in different zones is calculated using fick’s law. a chemical kinetics mechanism c...

Different models of hypersonic diffusive hydrogen combustion in a thin viscous shuck layer (TVSL) at moderate Reynolds numbers have been developed. The study is based on computations of nonequilibrium multicomponent flowfield parameters of air-hydrogen mixture in the TVSL near the blunt probe. The structure of computed combustion zones is analyzed. Under conditions of slot and uniform injection...