AIM The purpose of this investigation was to determine the kinetic frictional resistance offered by stainless steel and Titanium bracket used in combination with rectangular stainless steel wire during in vitro translatory displacement of brackets. MATERIALS AND METHODS In this study. Brackets: (All brackets used had a torque of - 7° and an angulation of 0°): (1) Dynalock (Unitek) 0.018'' slo...

An Al/Stainless Steel/Al lamellar composite was produced by roll bonding of the starting sheets at 400 °C. Afterward, the roll bonded sheet was cut in half and the accumulative roll bonding (ARB) process at room temperature was applied seven times. As a result, the central steel layer fractured and distributed in the Al matrix among different layers introduced by the repetition of roll bonding ...

Equal channel angular rolling (ECAR) process is one of the severe plastic deformation (SPD) methods that have been used to make ultra-fine grain (UFG) materials with improving the mechanical properties of samples. After performing the process at several paths, a large strain is applied to the material that can cause decreasing the grain size and improving the mechanical and physical properties ...

In this study, the hot deformation processing map of AISI 304 austenitic stainless steel in two initial grain sizes of 15 and 40 μm was investigated. For this purpose, cylindrical samples were used in the hot compression test at the temperature range of 950-1100 °C and the strain rate of 0.005-0.5% s-1. At first, the relationship between the peak stress and Zener-Hollomon parameter w...

Recently, machining has been exploited as a means for producing ultra-fine grained (UFG) and nanocrystalline microstructures for various metal materials, such as aluminum alloys, copper, stainless steel, titanium and nickel-based super alloys, etc. However, no predictive, analytical or numerical work has ever been presented to quantitatively predict the change of grain sizes during machining. I...

From a nano electronic circuit designer’s point of view the growth of ultrathin film in the ultra high vacuum chamber (UHVC) would imply better stainless steel structure. ZAF method and SEM (scanning Electron Microscopy) technique are used to realize surface nano crystallizafion on an stailness steel sample. The as-welded condition of UHVC is also studied to see if this chamber can prevent weld...