High- and low-pressure vacuum drains are commonly used after surgical procedures. High-pressure vacuum drains (ie, sealed, closed-circuit systems) are efficient and allow for easy monitoring and safe disposal of the drainage. Low-pressure vacuum drains use gentle pressure to evacuate excess fluid and air, and are easy for patients to manage at home because it is easy to reinstate the vacuum pre...

In this paper, the MEMS type ionization gauge with no X-Ray limitations has been presented. Having the dimensions of 2.4 mm× 0.8mm × 1.4 mm, the designed gauge is 9000 times smaller than the conventional type and can operate in HV and UHV pressures up to 5×10-9 torr. Operating at the temperature of 750°C, the cathode of proposed gauge is implemented using nickel and works in a way in...

The electromechanical analysis of a piezoresistive pressure microsensor with a square-shaped diaphragm for low-pressure biomedical applications is presented. This analysis is developed through a novel model and a finite element method (FEM) model. A microsensor with a diaphragm 1000 „m length and with thickness=400 µm is studied. The electric response of this microsensor is obtained with applyi...

We report a microfluidic fiber-optic refractive index (RI) sensor based on an in-line Fabry-Perot (FP) interferometer, which is formed by a silica tube sandwiched by two microstructured fibers (MFs). The sensor reported here can be fabricated at low cost, possess a robust structure, and has microfluidic capability. The micro-sized holes in the MFs naturally function as microfluidic channels thr...

Influencing the "injection barriers" into prototype molecular wires through metal-molecule Context: Many NIST customers using our vacuum calibration services spanning the pressure range from 0.65 Pa to 133 kPa (5 millitorr to 1000 torr) desire direct traceability to NIST but cannot justify the cost of calibration against relative to the NIST NIST Ultrasonic Interferometer Manometers (UIMs). The...

Micro hotlm shear-stress sensors have been developed by using surface micromachining techniques. The sensor consists of a suspended silicon-nitride diaphragm located on top of a vacuum-sealed cavity. A heating and heat-sensing element, made of poly-crystalline silicon material, resides on top of the diaphragm. The underlying vacuum cavity greatly reduces conductive heat loss to the substrate an...

the purpose of this study was to investigate the deposition of the hydroxyapatite (ha) coating via the electrophoresis procedure. the ha deposition was performed in an ethanol, methanol, acetone and isopropanol suspension. methanol was found to be the best deposition media. among the different environmental conditions, including the encapsulation of the samples under two vacuum types of pressur...