In this paper, a study on the characteristics and the reduction methods of ground vibration due to the tilting train travelling in the conventional line is carried out. The load transmitted into the ground is computed considering the interaction between the tilting car and the line. This load is then applied in the numerical model for the analysis of ground vibration due to the travelling tilti...

It has been suggested that poststenotic weakening of arterial walls is caused by arterial wall vibration and structural fatigue initiated by pressure disturbances in turbulent blood flow. We examined the frequency spectra of wall vibration downstream from experimental arterial stenoses and compared them with the natural resonant vibration characteristics of the artery walls. Spectra of arterial...

The vibratory behavior of a lab facility located in Building 401 of the Advanced Photon Source site at Argonne National Laboratory is summarized. Measurements of ambient vibration indicate that acceptable displacement levels are usually maintained (rms value below 0.1 microns) for the measured frequency range, above 0.2 Hz. An exception occurs when strong wind conditions excite a horizontal bui...

BACKGROUND Recently, a model of the ossicular chain for finite element analysis has been developed. However, the natural vibration characteristics of human ossicles have never been studied. Herein, we investigated the dynamic characteristics of the coupling of in-vivo ossicles using finite element analysis. METHODS The geometry of the ossicular chain was obtained by high-resolution computed t...

The long cane can be used as a mobility aid for visually handicapped people. According to a questionnaire completed by Japanese cane users, it seems they are not always satisfied with using long canes for a variety of reasons. In this study, hand-transmitted vibration from the long cane due to tapping the ground was measured because an exposure to repeated shock-type tapping vibration may affec...

A horizontal vibration isolation system utilizing displacement cancellation technique is studied both analytically and experimentally. The isolation and middle tables of the investigated vibration isolation system, involving displacement cancellation technique, are controlled by an infinite stiffness control and positive stiffness control, respectively. In this study, the dynamic characteristic...

The hydropower generating units’ vibration parameter is an important indicator to monitor its rollstabilization. To measure the low-frequency vibration of the large and middle scale of hydropower generating units, according to frequency characteristic compensation principle of the vibration sensor, a low-frequency compensating circuit was designed to extend the frequency characteristic to the l...

For smaller mechatronic device, especially for micro Electronic system, a micro machining is a must. However, most investigations on vibration of a mill have been limited to the traditional type mill. In this article, vibration and dynamic characteristics of a micro mill were investigated in this study. The trend towards higher precision manufacturing technology requires producing miniaturized ...

Vibration-based condition monitoring and fault diagnosis is an effective approach to maintain the reliable operation of a scroll compressor. Unfortunately, the vibration signal from the scroll compressor always has characteristics of being non-linear and non-stationary, which makes vibration signal analysis and fault feature extraction very difficult. To extract the significant fault features, ...

Ground-borne vibration excited by metro traffic is becoming a more and more important problem for the rapidly developing transport system in urban areas and increasing public concern about environmental problems. In order to attenuate the vibration influence down to an acceptable level, floating slab track have been applied worldwide on metro line. An analytical dynamic model is employed in thi...