Quasi-static and dynamic damage mechanisms in alumina tiles were investigated. The tiles were under a variety of boundary conditions at the tile's edges during impact NATO 0.3 cal. AP rounds with hardened and sharpened steel core were used. The alumina tile samples were 50x50 mm2 area, the thicknesses ranging from 5 to 12 mm. 'he tiles were mounted in a special confinement frame, which enabled ...

Concrete filled tube (CFT) columns have been used as primary axial load-carrying members in high-rise building especially in seismic zones. The structural member has become popular as it has a number of distinct advantages over an equivalent steel, reinforced concrete, or steel-reinforce concrete structural member. This paper is intended to presents numerical modeling of elliptical concrete-fil...

EDF Energy has the requirement to detect and size lack of penetration type defects in thin-walled stainless steel components. A high frequency ultrasonic phased array inspection technique has been successfully developed and applied to thin walled pipes and is currently used as an ENIQ qualified inspection on nuclear plant. The welds are manufactured with an autogenous Tungsten Inert Gas (TIG) w...

This study proposed a prediction formula for the torsional strength enabling to reflect the tensile strength of ultra high performance concrete (UHPC) beams based upon the thin-walled tube theory. The remarkable ductile behavior of UHPC can also be attributed to the steel fiber reinforcement. This feature must be considered to provide rational explanation of the torsional behavior of UHPC struc...

A stainless steel grid baked by a propane±air premixed ¯ame had iron, chromium and nickel oxide deposits on the grid surface. With this grid, entangled and curved shape multi-walled carbon nanotubes (MWNTs) were harvested from an ethylene±air di€usion ¯ame with yield rate of 3 mg/min. Nitrogen addition to the ¯ame was found to straighten the entangled tubes probably by lowering the ¯ame tempera...

the lack of complete understanding of the substrate effects on carbon nanotubes (cnts) growth poses a lot oftechnical challenges. here, we report the direct growth of nanostructures such as the cnts on stainless steel 304and brass substrates using thermal chemical vapor deposition (tcvd) process with c2h2 gas as carbon sourceand hydrogen as supporting gas mixed in ar gas flow. we used an especi...

The epoxy coatings containing multi-walled carbon nanotube/ poly ortho aminophenol nanocomposite were prepared and used as anticorrosive coatings. The nanocomposites with different contents of carbon nanotube were synthesized in a solution of sodium dodecyl sulfate and ammonium peroxy disulfate as a surfactant and an oxidant, respectively. The morphology and structural properties were confirmed...

Open cross-section, thin-walled, cold-formed steel columns have at least three competing buckling modes: local, distortional, and Euler ~i.e., flexural or flexural-torsional! buckling. Closed-form prediction of the buckling stress in the local mode, including interaction of the connected elements, and the distortional mode, including consideration of the elastic and geometric stiffness at the w...

To study the cold-forming effect on yield strength distribution of cold-formed thick-walled steel, material tensile tests and axial compression were conducted steel-lipped channels. undertake tests, five types lipped channel sections with varied thicknesses nominal strengths selected. The test samples taken from web, flange, curled edge, corner sections, respectively. Next, a corresponding mode...

Abstract This research investigates the behaviour of novel U‐connector used in cold‐formed steel (CFS) truss‐to‐column connection. The novelty is reflected specially designed connector geometry and connection method within cross‐section thin‐walled C‐profile. installed inside can be exposed to tensile, compressive shearing action. shear thoroughly investigated using laboratory tests. Three diff...