The exploitation of natural fibers to reinforce polymers is a promising practice. Thus, biocomposites have gained increased attention in automotive, construction, and agricultural sectors, among others. present work reports the reinforcement recycled high-density polyethylene (r-HDPE) with hemp afford composite materials as sustainable analogues conventional wood/plastic (WPC) products. HDPE bo...

Abstract Waste high-density polyethylene (w-HDPE)/ acrylonitrile–butadiene–styrene (ABS)/ground tire rubber (GTR) have been melt blended by two-roll milling. Ternary blends of w-HDPE/ABS/GTR observed to be incompatible in the composition range studied which revealed deteriorated mechanical properties. Two main types compatibilizers such as an experimental olefin-maleic anhydride copolymer based...

A six lump-based kinetic model has been developed for the hydrocracking of high-density polyethylene (HDPE) blended with vacuum gas oil (VGO) over a PtPd/HY zeolite catalyst. The blend (20 wt% HDPE and 80 VGO) hydrocracked in semi-continuous stirred tank reactor under following conditions: 400–440 °C; H2 bar; catalyst to feed (C/F) weight ratio, 0.05–0.1 gcat gfeed−1; reaction time, 15–120 min;...

Disposing of plastic wastes to landfill is becoming undesirable due to legislation pressures, rising costs and the poor biodegradability of commonly used polymers. In addition, incineration meets with strong societal opposition. Therefore, recycling either mechanical or chemical, seems to be the only route of plastic wastes management towards sustainability. Polyolefins, mainly polyethylene (LD...

Abstrcat High density polyethylene (HDPE) composite reinforced with 20wt% orange peels ash particles (OPAp) was prepared by compression moulding. Thermogravimetric analysis (DTA/TGA) (space) was conducted on the HDPE/orange peels ash particle composite to clarify the effect of OPAp on the thermal decomposition behavior of the resultant composite. The values of the activation energy for thermal ...

This study explains the influence of secondary filler on the dispersion of carbon nanotube (CNT) reinforced high density polyethylene (HDPE) nanocomposites (CNT/HDPE). In order to understand the mixed-fillers system, Montmorillonite (MMT) was added to CNT/HDPE nanocomposites. It was followed by investigating their effect on the thermal, mechanical and morphological properties of the aforesaid n...

Low density polyethylene (LDPE) and high (HDPE) are the principal plastics present in solid plastic waste found out as main components of microplastics marine terrestrial environments. Currently, efforts have been made to develop new effective methods ensure identification separation waste, ensuring necessary purity obtain quality economically competitive recycled products. In this contribution...

Blends based on recycled high density polyethylene (R-HDPE) and recycled poly(ethylene terephthalate) (R-PET) were made through reactive extrusion. The effects of maleated polyethylene (PE-g-MA), triblock copolymer of styrene and ethylene/butylene (SEBS), and 4,40-methylenedi(phenyl isocyanate) (MDI) on blend properties were studied. The 2% PE-g-MA improved the compatibility of R-HDPE and R-PET...

High-melting-temperature poly(ethylene terephthalate) (PET) was successfully introduced into wood plastic composites through a two-step reactive extrusion technology. Wood flour was added into pre-prepared PET/high density polyethylene (HDPE) microfibrillar blends (MFBs) in the second extrusion at the temperature for processing HDPE. Addition of 25% in situ formed PET microfibers obviously incr...