an experimental study of the phase inversion behavior of liquid-liquid dispersion has been conducted in a spray extraction column for systems of toluene / water, n-hexane/water, ccl4/water, toluene /water + glycerol (25 % wt), toluene + ccl4 (25 % wt) / water and toluene / acetic acid (5 % wt)/water. the effects of physical properties, mass transfer and column geometry on phase inversion have b...

Application of nanofluid and coiled tubes are two passive methods for increasing the heat transfer. In the present study, the turbulent flows of water and nanofluid in coiled tubes heat exchanger were numerically studied. CuO-water nanofluid containing 1 vol% copper oxide nanoparticles was used and single-phase approach was considered for nanofluid flow. The effect of different geometrical para...

The interbasin water transfer project is an alternative to balance the nonuniform temporal and spatial distribution of water resources and water demands, especially in arid and semi arid regions. A water transfer project can be executed if it is environmentally and economically justified. In this study, the feasibility of two interbasin water transfer projects from Karoon River in the western p...

Sometimes the need for non-circular ducts arises in many heat transfer applications because of lower pressure drop of non-circular cross section such as square duct compared to circular tube, particularly in compact heat. But square cross section has poor heat transfer performance and it is expected that using a nanofluid as a new heat transfer media may improve the heat transfer performance of...

An experimental investigation on the effect of surfactant monolayers on the heat transfer through air/water and oil/water interfaces was carried out by observing the changes of surface temperature with IR Imaging Radiometer (Model 760). The heat transfer resistance of various single component and mixed monolayers at air/water and oil/water systems was studied. The results show that the surfacta...

heat and mass transfer, in this paper, is considered in one-row heat exchanger, that fins are hotter than air flow and water is added to fins. related governing equations are derived by analyzing a two-dimension model in a unique cell of a heat exchange. these equations are numerically solved by finite difference method. heat transfer and efficiency under partially wet surface are calculated by...

the present work is an experimental study of steady state convective heat transfer of de-ionized water with a (0.04% by volume) volume fraction of al2o3 nanoparticles dispersed to form a nanofluid that flows through an aluminium tube.laminar fully developed flow heat transfer coefficient of al2o3 nanoparticles are dispersed in water in circular tube is discussed in this paper. in order to valid...

Heat and mass transfer, in this paper, is considered in one-row heat exchanger, that fins are hotter than air flow and water is added to fins. Related governing equations are derived by analyzing a two-dimension model in a unique cell of a heat exchange. These equations are numerically solved by finite difference method. Heat transfer and efficiency under partially wet surface are calculated by...