We demonstrate microfluidic laser intra-cavity absorption spectroscopy with mid-infrared lambda approximately 9mum quantum cascade lasers. A deepetched narrow ridge waveguide laser is placed in a microfluidic chamber. The evanescent tails of the laser mode penetrate into a liquid on both sides of the ridge. The absorption lines of the liquid modify the laser waveguide loss, resulting in signifi...

We report the demonstration of a near-diffraction-limited, compact, diode-end-pumped double-clad planar waveguide Nd:YAG laser. Efficient laser operation was achieved for the three dominant Nd(3+) transitions, at 1.064, 0.946, and 1.32microm , with TE polarized output powers of 1.33, 0.57, and 0.33 W for the available output couplers. The output beam from the monolithic plane-plane laser cavity...

Guiding of intense 10 μm laser light over many Rayleigh ranges is important in many advanced accelerator schemes. We have carried out such guiding experiments using both evacuated and gas-filled tubes of different materials. The CO2 laser pulse length was typically 200ps (FWHM) and the CO2 laser peak power was up to 100GW. A maximum energy transmission of 15% was obtained when a 2 cm long, 1mm ...

Fabrication, characterization, and laser performance of an Yb:Lu₂O₃ planar waveguide laser are reported. Pulsed laser deposition was employed to grow an 8 µm-thick Yb-doped lutetia waveguide on a YAG substrate. X-ray diffraction was used to determine the crystallinity, and spectroscopic characterization showed the absorption and emission cross-sections were indistinguishable from those reported...

We report on the first demonstration of a fully suspended 10 m Fabry-Perot cavity incorporating a waveguide grating as the coupling mirror. The cavity was kept on resonance by reading out the length fluctuations via the Pound-Drever-Hall method and employing feedback to the laser frequency. From the achieved finesse of 790 the grating reflectivity was determined to exceed 99.2% at the laser wav...

High-quality monoclinic planar waveguide crystals of Tm-doped KY(WO4)2 codoped with Gd3+ and Lu3+ were grown by liquid-phase epitaxy. For the first time, planar waveguide lasing was demonstrated in a monolithic cavity in the 2 µm spectral range. The laser was operated in the Q-switched mode using a Cr2+:ZnSe crystal as saturable absorber and in the continuous-wave regimes. The Q-switched planar...

Polymer waveguides have emerged as a viable technology for integrated optical devices due to their high packaging density, low cost, capability of integration with other material systems, and ease of fabrication and modification of their chemical structure. This latter property offers enormous flexibility in the design of waveguide laser media. Although laser action has been achieved in many op...

We report a new technique for the rapid fabrication of microstripe cylindrical and toroidal mirrors with a high ratio (>10) of the two principal radii of curvature (RoC(1)/RoC(2)), and demonstrate their effectiveness as mode-selecting resonator mirrors for high-power planar waveguide lasers. In this process, the larger radius of curvature (RoC(1)) is determined by the planar or cylindrical shap...

We present results from laser annealing experiments in Si using a passively Q-switched Nd:YAG microlaser. Exposure with laser at fluence values above the damage threshold of commercially available photodiodes results in electrical damage (as measured by an increase in photodiode dark current). We show that increasing the laser fluence to values in excess of the damage threshold can result in an...

A novel laser that utilizes a silicon waveguide bonded to AlGaInAs quantum wells is demonstrated. This wafer scale fabrication approach allows the optical waveguide to be defined by CMOS-compatible silicon processing while optical gain is provided by III-V materials. The AlGaInAs quantum well structure is bonded to the silicon wafer using low temperature oxygen plasma-assisted wafer bonding. Th...