Removal of cesium from synthetic aqueous solution through adsorption on bentonite, under batch equilibrium experimental condition at different values of pH and four temperatures (303, 313, 323, 333 K) was investigated. For this propose the suitability of the Freundlich adsorption model for equilibrium data were investigated. The parameters in the adopted adsorption isotherm models were determin...

Sawdust is obtained from naturally and easily available which is biodegradable. The bio sorption capacity of the sawdust for hexavalent chromium was studied at different solution pH values (1.5-6), initial metal concentration (50450 mg/L), adsorbent dose (1-7 g/L). The maximum adsorption of Cr (VI) is obtained at pH 1.5, initial concentration 50 ppm and adsorbent dose 5 g/l. The adsorption of c...

Boron removal capacity of multi-walled carbon nanotubes (MWCNTs) modified with tartaric acid was investigated in this study. Modification of MWCNTs with tartaric acid was confirmed by Boehm surface chemistry method and fourier transform infra-red (FT-IR) spectroscopy. Experiments were performed to determine the adsorption isotherm and adsorption thermodynamic parameters of boron adsorption on t...

Magnetic polyvinyl alcohol adsorbent M-PVAL was employed to remove and concentrate dimethyl phthalate DMP. The M-PVAL was prepared after sequential syntheses of magnetic Fe3O4 (M) and polyvinyl acetate (M-PVAC). The saturated magnetizations of M, M-PVAC, and M-PVAL are 57.2, 26.0, and 43.2 emu g(-1) with superparamagnetism, respectively. The average size of M-PVAL by number is 0.75 μm in micro ...

Activated carbon prepared from coir pith (ZnCPC) using ZnCl2 was investigated to find the feasibility of its application for removal of 2,4–dichlorophenol (2,4-DCP) in aqueous solution through adsorption process. Batch mode kinetics and isotherm studies were carried out to evaluate the effects of contact time, initial concentration, adsorbent dose, pH, and temperature. Lagergren, Second order, ...

The adsorption of methyl tert-butyl ether by granular activated carbon was investigated. The experimental data were analyzed using the Freundlich isotherm and the Langmuir isotherm. Although equilibrium data were found to follow Freundlich isotherm model, it were fitted better by the Langmuir model with a maximum adsorption capacity of 204.1 mg/g. The kinetic data obtained at different concentr...

The adsorption of polyester onto organically modified silicas (ormosils) and (commercial) fumed silica has been compared utilising ToF-SIMS. The thermodynamics of each system was examined by constructing adsorption isotherm plots which indicated that the adsorption of polyester onto one of the modified silicas used may be a two stage process. Adsorption onto the fumed silica is in accord with t...

Activated carbon was prepared from Enteromorpha prolifera by zinc chloride activation. The adsorption behaviors of three reactive dyes (Reactive Red 23, Reactive Blue 171 and Reactive Blue 4) onto this biomass activated carbon were investigated in batch systems. The experimental findings showed that the removal efficiencies of three dyes onto activated carbon were maximum at the initial solutio...

This study focuses on the adsorption and preconcentration of various metals by silica gel surfaces modified with aminopolycarboxylic acids namely ethylenediaminetetraacetic acid or diethylenetriamine-pentaacetic acid. The adsorption performance of the studied materials was determined in mixed metal solutions and the adsorption isotherm studies were conducted for cobalt, nickel, cadmium, and lea...

The efficiency of activated parthenium hysterophorous as an adsorbent for removing Pesticide mixture from water has been studied. Batch mode adsorption experiments have been conducted by varying pH, concentration, adsorbent dose and contact time. Pesticide removal was pH-dependent and found to be maximum at pH 2.0. The maximum removal of pesticides was achieved within 100 min after the start of...