In the present study, Al5083- Al2O3 nanocomposite was successfully prepared by friction stir processing (FSP) with rotational speed of 710 rpm and travel speed of 14 mm/min. In order to improve distribution of Al2O3 particles, a net of holes were designed on the surface of Al5083 sheet. The samples were characterized by optical and scanning electron microscopy (SEM), microhardness, tensile and ...

Doped Si nanoparticles (SiNPs) with conformal carbon coating and cyclized-polyacrylonitrile (PAN) network displayed capacities of 3500 and 3000 mAh g(-1) at C/20 and C/10, respectively. At 1 C, the electrode preserves a specific discharge capacity of ∼1500 mAh g(-1) for at least 60 cycles without decay. Al2O3 atomic layer deposition (ALD) helps improve the initial Coulombic efficiency (CE) to 8...

In recent decades, the use of nanofluids has attracted much attention due to its application in various fields such as medical and industries like oil and gas. The combination of nanoparticles with base fluids and its type can produce different results depending on the characteristics of the nanoparticles, one of which is the effect of changes in the viscosity and thermal conductivity of the na...

In this study different nanofluids with phase change behavior were developed by mixing a molten salt base fluid (KNO3 selected as phase change material) with nanoparticles using the direct synthesis method. The thermal properties of the nanofluids obtained were investigated. Following the improvement in the specific heat achieved, these nanofluids can be used in concentrating solar plants with ...

The effect of impregnation sequence on the formation of Pt/Ni bimetallic nanoparticles supported on g-Al2O3 was investigated for catalysts with Pt/Ni atomic ratios of 3/1 and 1/1. These bimetallic catalysts were prepared with a fixed Pt loading (5 wt.%) by incipient impregnation of one metal precursor and calcination, followed by the impregnation of the second metal precursor and a second calci...

Al2O3:SiOC nanocomposites were synthesized by thermal treatment of fumed alumina nanoparticles modified by phenyltrimethoxysilane. The effect of annealing temperature in inert ambient on structure and photoluminescence of modified alumina powder was studied by IR spectroscopy as well as photoluminescence spectroscopy with ultraviolet and X-ray excitation. It is demonstrated that increase of ann...

Numerical simulation and experimental investigation were used for study of laminar forced convective heat transfer of Al2O3/water nanofluid. Single phase model with temperaturedependent properties was employed for numerical simulation of transport phenomena in nanofluid. The results of experiments and computer-aided simulation indicated remarkable enhancement of convective heat transfer of base...

Experimental investigation of heat transfer during pool boiling of two nanofluids, i.e., water-Al2O3 and water-Cu has been carried out. Nanoparticles were tested at the concentration of 0.01%, 0.1%, and 1% by weight. The horizontal smooth copper and stainless steel tubes having 10 mm OD and 0.6 mm wall thickness formed test heater. The experiments have been performed to establish the influence ...

Tetraplatinum cluster complexes bearing hydrophilic anchors, [Pt4(μ-OCOCH3)4(μ-OCOC6H4OH-4)4] (2a), [Pt4(μ-OCOCH3)4(μ-OCOC6H4B(OH)2-4)4] (2b), and [Pt4(μ-OCOCH3)4(μ-OCOC6H4NH2-4)4] (2c), were successfully prepared by a selective substitution reaction of four in-plane acetates of [Pt4(μ-OCOCH3)8] (1) with the corresponding p-substituted benzoic acids. Solid-state structure determination of 2a re...

V2O5 xerogel films were fabricated by casting V2O5 sols onto fluorine-doped tin oxide glass substrates at room temperature. Five, ten and twenty atomic layers of Al2O3 were grown onto as-fabricated films respectively. The bare film and Al2O3-deposited films all exhibited hydrous V2O5 phase only. Electrochemical impedance spectroscopy study revealed increased surface charge-transfer resistance o...