The evolution of the pyrolysis of sewage sludge in a fixed and a fluidized bed was analyzed using a novel measuring technique. This original measuring technique consists of installing the whole reactor over a precision scale, capable of measuring the mass of the complete reactor with enough precision to detect the mass released by the sewage sludge sample during its pyrolysis. The inert conditi...

Since the earlier anaerobic treatment systems, the design concepts were improved from classic reactors like septic tanks and anaerobic ponds, to modern high rate reactor configurations like anaerobic filters, UASB, EGSB, fixed film fluidized bed and expanded bed reactors, and others. In this paper, anaerobic reactors are evaluated considering the historical evolution and types of wastewaters. T...

A fluidized bed reactor that is operating in the bubbling regime has been developed for the conversion of bio-oils to syngas.The reactor consists of a 7.6 cm I.D. (or internal diameter) bed, with an expanded freeboard. The volume of the reactor can be adjusted to vary the gas residence time. This reactor has been used to carry out either thermal or catalytic cracking for reforming bio-oils.A ga...

−− A previously developed deterministic steady state module for modeling methanogenic biofilm reactors has been revised to enlarge the model application range and to deal with system dynamics. Two models for the hydrolysis of non-active biomass representing extreme alternatives: without biomass hydrolysis (model A) and with complete and instantaneous hydrolysis of non-active suspended and attac...

The fluidization characteristics of a prototype-fluidized bed laboratory reactor were understudied in order to investigate the suitable conditions at which the dehydrogenation reaction of butane could be carried out. To achieve this, a reactor with an effective volume of 1100ml was fabricated and coupled with temperature and pressure accessories. Zeolites were obtained from the market and clay ...

In present paper, dynamic behavior and control of a fluidized bed reactor for polyethylene production has been considered. A double active sites model for Ziegler-Natta catalysts is used for simulation of polymerization reaction. Hydrodynamic behavior of the bed is modeled using a two phase model including bubble and emulsion phases in which bubble phase has plug flow pattern with different...

−− The present work is focused on evaluating the anaerobic digestion of complex substrates (proteins and carbohydrates) in anaerobic fluidized bed reactors (AFBRs). In a previous paper, an AFBR model was adjusted using only the experimental data obtained during the acclimatization stage (glucose and acetate-based feeding) of two mesophilic bioreactors. Here, the sensitivity of that model to rep...

Fluidized bed was employed to investigate propane steam reforming over Ni-K/CeO2-Al2O3 catalyst. The catalyst was characterized by XRD, SEM, TG/DTA, and N2 adsorption-desorption tests. Effects of promoters, space velocity, temperature, and steam/propane (S/C) ratio on propane conversion, H2 yield, H2/CO ratio, and stability were studied and discussed. The experiments were carried out under cond...

Fluidized bed is commonly used for struvite (MgNH4PO4·6H2O) recovery from wastewater. However, effective methods are lacking to describe the properties of the millimeter-scale struvite pellets in the fluidized bed, with the consequence of not predicting and optimizing the granulation process effectively. In this work, swine wastewater was used as the medium for struvite recovery by using fluidi...