This paper presents a new dual-band elliptical dielectric resonator antenna (EDRA). The EDRA is mounted on a ground plane and fed with a rectangular slot exited by a microstrip line. By optimizing the structure parameters, it is possible to obtain more than one excited mode in a limited frequency band. Numerical and measurement results for the radiation patterns of this slot fed EDRA are given ...

The theory of the dielectric cone antenna has been known since the early seventies. On their own, this antenna has a reasonably circular symmetric radiation pattern but exhibits an undesirably high side-lobe level. A properly designed metallic shield, which does not interfere with the field structure of the dielectric cone, may be used to reduce the side-lobe level. Although in principle this a...

Future base stations for Spatial Division Multiplex Access (SDMA) will utilize adaptive antenna arrays, capable of identifying the direction of the incoming signal and steering the transmitted beam in appropriate directions. The radiating elements that have been thus far considered for building the antenna array are typically wire dipoles or microstrip patches. This tutorial paper describes a n...

ELECT A new ultra-wideband (UWB) antenna integrated with a narrow-band (NB) antenna has been designed and fabricated. The UWB antenna consists of a U-shaped dielectric resonator fed by a microstrip line. In addition, the proposed structure integrates an NB slot with the same polarisation. The electromagnetic analysis is carried out by using two commercial software tools. To validate the propose...

In an infrared photodetector, noise current (dark current) is generated throughout the volume of detector. Reducing will reduce dark current, but corresponding smaller area also received signal. By using a separate antenna to receive light, one can detector without reducing signal, thereby increasing its signal ratio (SNR). Here, we present dielectric resonator (DRA) coupled photodetector. Its ...

The design and optimization of an annular ring dielectric resonator antenna (DRA) operating in the C frequency band is addressed. The DRA is intended to be used as the radiating element of a transmitting array of active integrated antennas, its input impedance must exhibit a proper resistive load at the fundamental resonance frequency, as well as a dominant reactive behavior, either inductive o...

In this paper, a novel multi-permittivity cylindrical dielectric resonator antenna for wideband application is presented. The multi-permittivity cylinder is formed by combining two different permittivity material sectors in such a way that each sector (with constant permittivity) is 90 degree apart. A direct microstrip line coupling terminated with T-stub at the open end is used to excite the m...

The goal of this paper is to use polymer-based materials (instead of hard ceramics) in fabrication of dielectric resonator antennas at millimeter-wave frequencies. The soft nature of polymers facilitates machining of antennas, while the low permittivity of polymers naturally enhances the bandwidth. More importantly, advantageous properties (e.g., flexibility and photosensitivity) of some polyme...

The design of a wideband circularly polarized pixelated dielectric resonator antenna using a real-coded genetic algorithm (GA) is presented for far-field wireless power transfer applications. The antenna consists of a dielectric resonator (DR) which is discretized into 8 × 8 grid DR bars. The real-coded GA is utilized to estimate the optimal heights of the 64 DR bars to realize circular polariz...